Contributing Member Clay Posted January 7, 2011 Contributing Member Report Posted January 7, 2011 A while back ClayB, Kathy Flanagan and myself did a leather project where we each did some carving on one piece. The idea came from ClayB, he did his Buffalo Feathers carving, then Kathy added some Flying Buffalo Calfs, and I did some floral carving. It was cool to see what each of us did to add to the piece. I have been wanting to do something like this again and I have come up with an idea. I would like to do a floral carving piece where we break it down to each step and stamp used in the process. The way it would work is one person would draw the pattern, the next person would do the swivel knife cuts, the next would do the flower centers, the next would do the thumbprints, and so on, with each person only using one stamp. The piece would have room on it for each person to put their makers mark or signature and what stamp or tool they used. Once the piece is finished it could be raffled off to help pay some bills for LW. The number of steps and what order the stamps are used would have to be determined, but with a little planning it would be easy to set up. The only cost would be some time and the postage to the next person. I am willing to donate a piece of leather and draw the pattern. I am open to suggestions and further discussion on this. If there is a lot of interest we could even do more than one piece. Let me know what you all think! Clay Miller Clay Miller
Members Spinner Posted January 7, 2011 Members Report Posted January 7, 2011 Hey Clay, very interesting idea. If you're looking for ideas of interactive stuff for the site as well, the woodturning site I started years ago has been doing what we call the "Challenge & Trade" quarterly events. The idea behind them was to promote trying new skills, techniques and for folks to see/own the work of others they may not have been exposed to on their own. How it works is the challenge is presented to the group and sign-ups are taken. Specs like min/max size are given to ensure projects are roughly equal. Entrants are given roughly a month to complete their challenge items. 2-3 days prior to the deadline, the list of sign-ups is randomized (using the http://www.random.org/lists/ website for fairness) and then posted. On the deadline date, folks post pictures of their completed projects and then mail them to their trade partner from the list. Some examples of challenges that could work for LW.net: New Experience challenge: use a new technique, material or tool you haven't tried before in a project Interpretation challenge: take an existing theme/project and modify it to present it as a new (possibly improved) work Project specific: coasters, trading cards, a specific pattern, etc. Tool specific: create an item using only the tool/tools listed in the challenge Here's an example of what we ended up with for the "Squares" challenge: http://www.woodturnersresource.com/wrphotopost/showgallery.php?cat=524 The project was to turn a project out of a 4"x4"x4" piece of wood. The trick to it was the finished item had to have a square aspect to it, which in woodturning isn't the easiest feat. Chris Three Mutts Customs Leather - http://www.threemuttscustoms.com
Contributing Member ClayB Posted January 11, 2011 Contributing Member Report Posted January 11, 2011 I think that' a great idea Bert. I'm surprised and a little disappointed that you haven't gotten any more response to this (and hoping maybe people are responding privately). I have enjoyed the projects I've worked on with other people and hope to do more of them in the future. ClayB Badlands Leather Art blog Badlands Leather Art Website
MarkB Posted January 11, 2011 Report Posted January 11, 2011 Clay I will try my hand at it if you get enough to do it. Mark Visit My Website To succeed you must try, Not trying your sure to fail.
Contributing Member Clay Posted January 13, 2011 Author Contributing Member Report Posted January 13, 2011 Thannks ClayB and Mark, Still looking for more people to take part. Clay Miller
Members Spinner Posted January 14, 2011 Members Report Posted January 14, 2011 Thannks ClayB and Mark, Still looking for more people to take part. Hey Clay, I just realized in my long winded post that I didn't say I'm in for it. I just hope my skills are up for the challenge. Chris Chris Three Mutts Customs Leather - http://www.threemuttscustoms.com
terrymac Posted January 14, 2011 Report Posted January 14, 2011 Hey gang, sounds like fun. Just don't ask me to draw the pattern. LOL Terry
Hilly Posted January 14, 2011 Report Posted January 14, 2011 Count me in, as long as I don't have to bevel....zzzzzzzz.... Hilly
Members Double U Leather Posted January 16, 2011 Members Report Posted January 16, 2011 I'll play. I think it sounds like fun. Count me in.
Contributing Member Clay Posted January 20, 2011 Author Contributing Member Report Posted January 20, 2011 So far we have seven people willing to take part in my little experement. If we don't get more interest maybe we can each do two or three steps.. I have not drawn any pattern yet but thought I would start soon. Also what all tools will we use? Typically I use about 10 to 14 different stamps and the swivel knife. These are the steps that I typicaly do on a pattern in the order I use them. If no one has any objections to it I think this is the order we should use to tool this project. Swivel knife cut all lines centers flowers camoflauge flowers and some vine center shader flowers thumbprint/ pear shader flowers, leafs and petals lifters flowers, some leafs leaf liner leafs, acanthus veiner leafs, flower pod, beveler all lines seeder flower and leaf stems some seed pods mulefoot flower and leaf stems, vine junctions bargrounder/ backgrounder non-plant parts of pattern swivel knife finish cuts to accent flow of pattern Let me know which one you would like to do and we can get started on this. Clay Clay Miller
terrymac Posted January 20, 2011 Report Posted January 20, 2011 Clay, If a Barry King #27 bargrounder will work in the pattern, I could do that along with the decorative swivel cuts. Terry
Members Double U Leather Posted January 20, 2011 Members Report Posted January 20, 2011 Clay, I don't know if this is an objection, or just a thought.....I think that whoever swivel cuts the pattern should probably do the beveling as well. The reason is, I've found if the cuts aren't beveled fairly soon, they tend to close up making it harder to get a good deep bevel. I'm not saying your order of tooling is wrong, but when factoring in sending this piece to one person for one thing, and then on to another person for the next step, etc., we could sure be faced with cuts closing up. Just a thought.
Members Deno Posted January 20, 2011 Members Report Posted January 20, 2011 I'd be willing to help out if you would like me to. My best to everyone, Deno. Making Leather Projects.
Contributing Member Clay Posted January 21, 2011 Author Contributing Member Report Posted January 21, 2011 Swivel knife cut all lines centers flowers camoflauge flowers and some vine center shader flowers thumbprint/ pear shader flowers, leafs and petals lifters flowers, some leafs leaf liner leafs, acanthus veiner leafs, flower pod, beveler all lines ClayB seeder flower and leaf stems some seed pods mulefoot flower and leaf stems, vine junctions bargrounder/ backgrounder non-plant parts of pattern Terrymac swivel knife finish cuts to accent flow of pattern Let me know which one you would like to do and we can get started on this. Clay Clay Miller
Members Double U Leather Posted January 21, 2011 Members Report Posted January 21, 2011 I'll do the thumb print/pear shading parts.
Contributing Member Clay Posted January 21, 2011 Author Contributing Member Report Posted January 21, 2011 Swivel knife cut all lines ClayM centers flowers MarkB camoflauge flowers and some vine center shader flowers thumbprint/ pear shader flowers, leafs and petalsLeatherrookie lifters flowers, some leafs leaf liner leafs, acanthus veiner leafs, flower pod, acanthus beveler all lines ClayB seeder flower and leaf stems some seed pods mulefoot flower and leaf stems, vine junctions bargrounder/ backgrounder non-plant parts of pattern Terrymac swivel knife finish cuts to accent flow of pattern Let me know which one you would like to do and we can get started on this. Clay Clay Miller
Members Double U Leather Posted January 22, 2011 Members Report Posted January 22, 2011 Clay, If you need me to, I would also be willing to do the lifters. I don't know how many people we're getting signed up, but lifters and thumb prints seem to go together. Let me know.
Hilly Posted January 22, 2011 Report Posted January 22, 2011 I'd like to do the veining, please. Hilly
Recommended Posts