Members Leather stitcher Posted June 13, 2008 Members Report Posted June 13, 2008 Show Respects to ed, First of all, we do thanks for your supports! I see your articles often, and learned that you are one of top expert in leather industry. Inspirations always come from professional people. We have been working together with customer for many years, and keep improving machine’s quality, value, and service as well. Today we are not layman to leather sewing machine and sail making machine. However any advice from customers will be greatly appreciated. If you have any suggestion about our machine or service, please kindly contact with Ryan, we will fully respect your opinion! With kind regards, Bill I have the Neel's Model 6 (441 long arm). All is great. Ryan is great. I use a combination of Neel's plates and feet and Artisan's feet. Sometimes I do need to make height adjustments and rotation adjustments by messing with a few bolts. I have written about this in a post somewhere. By messing with these adjustments I have found a happy medium.My thinking is that these adjustments will be factory set differently, depending on the distributor, but with a little understanding the proper adjustments can be made. I'll be sure to post another question, because there are two bolts for whose purpose I'd like to know. ed Quote
Members Rolf Posted July 22, 2008 Members Report Posted July 22, 2008 Cowboys do not have electrical power during their job :-) I would strongly suggest the Boss from Tippmann. All my letaher work is done with this great machine: www.western-saddlery.ch & www.western-wear.ch : The largest western store in Switzerland. Quote Rolf Menzi www.western-wear.ch Switzerland
Members chrisash Posted July 29, 2018 Members Report Posted July 29, 2018 One small point ISO 9002 does not mean a part that is made is of high quality, its a strange thing to understand but it just means the quality is standard throughout the part, If they make a low quality part say a tin bottle opener, then as long as all of them are made to the same quality then ISO 9001 is OK You could make a better product and that would be no acceptable to your present ISO 9002 qualification unless re qualified with the new part So make every part to the same specification and your ok regardless if its crap or first class Quote Mi omputer is ot ood at speeling , it's not me
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.