If You Do A Fish Scale Stamping

[ShortBBL]

Can you show something ith that pattern and show/tell what exact stamp you're using? I am having trouble finding one that will do a nice Fish Scale...

Thanks!

[Tina]

I use the mulefoot tools:

U-851, U-853, & U-855 or U-858, U-859 or U-710 whatever you prefer. They can also be used for dragon and snake scales:-)

I attache a picture where I have used the mulefoot for the fish scales:

[Shooter McGavin]

I use the mulefoot tools:

U-851, U-853, & U-855 or U-858, U-859 or U-710 whatever you prefer. They can also be used for dragon and snake scales:-)

I attache a picture where I have used the mulefoot for the fish scales:

Nice Work! Especially towards the middle there where you have the water on top of the fish.

[ShortBBL]

I like this pattern but cant find the tool that is wide enough. Most are more pointy vs rounder like in the pic.

[Luke Hatley]

Shorts, that is a Very Large Camoflodge Tool, look for the # c454 or c453

Edited February 2, 2011 by Luke Hatley

[Tina]

Nice Work! Especially towards the middle there where you have the water on top of the fish.

Thanks a Million :-)

I'm quite happy with the details too, the pattern came out much better than I had ever hoped for.

[BIGGUNDOCTOR]

If ya can't find it, make it!

A tube trimmed into a half round on one end will do the trick for a simple scale effect. For more details, piece of metal, plastic, or even a harder wood will work.