RMB Custom Leather Posted February 7, 2011 Report Posted February 7, 2011 I saw John Bianchi use this tool in his DVD Western Holster Making. He called this tool a "flat boning tool" and later in the DVD mentioned that is was used by old saddle makers. He used the tool to close the holes made when stitching the leather; he rolled it over the stitch line. He also mentioned that is was a "roller" not just a flat smooth surface. I wanted to find one of these tools if anyone happens to know where I can get one please let me know. I have found some wooden large rollers that could be used however I would really like a tool just like this one. See attached picture Quote
Ambassador Luke Hatley Posted February 7, 2011 Ambassador Report Posted February 7, 2011 the photo was very bad.......but I have a tool "very similar" to that and it is reffered to as a seam roller. i got it at a store that sold wall paper supplies. Quote
RMB Custom Leather Posted February 7, 2011 Author Report Posted February 7, 2011 (edited) the photo was very bad.......but I have a tool "very similar" to that and it is reffered to as a seam roller. i got it at a store that sold wall paper supplies. Thanks for the reply. Sorry about the picture I had to take it from the TV screen, couldn't find a better way to get it. I still can't figure out how to down size the pictures on here. Any idea exactly which supplier you found yours at all I have found are wooden. Edited February 7, 2011 by wwwrmbbladescom Quote
RMB Custom Leather Posted February 7, 2011 Author Report Posted February 7, 2011 Best one I have found so far... http://www.amazon.com/Big-Horn-19596-Stainless-J-Roller/dp/B001DDY69Y/ref=sr_1_5?s=hi&ie=UTF8&qid=1297098353&sr=1-5 Quote
RMB Custom Leather Posted February 7, 2011 Author Report Posted February 7, 2011 Well I stand corrected. I called John Bianchi Frontier Gunleather and spoke to a maker; he said that those tools were specially made. He went on to say that the tool was actually not a roller but a polished piece of steel with an attached handle and that with most modern sewing machines it’s not needed. So I guess any flat polished surface would work for the same purpose. Quote
Ambassador Luke Hatley Posted February 7, 2011 Ambassador Report Posted February 7, 2011 Glat that you talked to B G L. i thought about making my self one of those but i decided i could do the same with useing a SMOOTH FACE COBLERS HAMMER. Quote
Members particle Posted February 16, 2011 Members Report Posted February 16, 2011 (edited) If you'd like to make one yourself, go to the local tool store and buy a wide wood chisel - run it through your grinder to round the end, sand or file it smooth, then polish it. I debated making one too, as my Boss leaves tracks on the backside of my holsters, though I'm usually able to smooth them out with my bone folder. Edited February 16, 2011 by particle Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.