Members newfiebackflip Posted February 16, 2011 Members Report Posted February 16, 2011 Good day leather workers, I am looking for a supplier for steel spring clips or spring steel clips or whatever you would like to call them. I know Tandy sells them but they are far to expensive, I am not looking to mass produce products by any means just would rather get a whack of them for cheap compared to $4 a pop. Attached is a picture for reference. Thanks Quote
RMB Custom Leather Posted February 16, 2011 Report Posted February 16, 2011 (edited) Good day leather workers, I am looking for a supplier for steel spring clips or spring steel clips or whatever you would like to call them. I know Tandy sells them but they are far to expensive, I am not looking to mass produce products by any means just would rather get a whack of them for cheap compared to $4 a pop. Attached is a picture for reference. Thanks I bought to many last time I ordered some so if your intrested I can let some go for $1.50 plus shipping. 7/8" x 3" Spring steel, black finish. See attached picture. see below email or call 704-239-6742 Rob Edited February 16, 2011 by wwwrmbbladescom Quote
BevJones Posted February 21, 2011 Report Posted February 21, 2011 www.ohiotravelbag.com last time I loooked they ran as little as .97 ea. Quote
Members newfiebackflip Posted February 22, 2011 Author Members Report Posted February 22, 2011 Thank you both! Quote
Members Rayban Posted March 1, 2011 Members Report Posted March 1, 2011 Try this place...USA made , cheap...no min. order.... http://www.jrmclips.com/ Quote
Members BigRiverLeather Posted February 24, 2012 Members Report Posted February 24, 2012 Try this place...USA made , cheap...no min. order.... http://www.jrmclips.com/ Is this place still in business? I emailed them a week ago with no response. I tried calling them and the number is not in service. Quote
Members Rayban Posted February 24, 2012 Members Report Posted February 24, 2012 Is this place still in business? I emailed them a week ago with no response. I tried calling them and the number is not in service. I can't tell you if they are still alive or not....back when I posted that (a year ago) I was buying from them...then they quit replying to my phone calls and email and orders, so I gave up on them. My guess is that my orders where smaller than they wanted to deal with, but it would have been ok with me if they would have just told me as much. Quote
Members BigRiverLeather Posted February 25, 2012 Members Report Posted February 25, 2012 (edited) I can't tell you if they are still alive or not....back when I posted that (a year ago) I was buying from them...then they quit replying to my phone calls and email and orders, so I gave up on them. My guess is that my orders where smaller than they wanted to deal with, but it would have been ok with me if they would have just told me as much. There has to be somebody out there that has a similar selection. I've been looking but only find one or two styles. I'm looking for something like this - it looks like it would lock on to pants without a belt pretty good. A request by a customer EDIT: Either of the top two clips EDIT AGAIN: I dialed the wrong number, got through to voice mail Edited February 25, 2012 by BigRiverLeather Quote
Members HDL Posted February 28, 2012 Members Report Posted February 28, 2012 Good day leather workers, I am looking for a supplier for steel spring clips or spring steel clips or whatever you would like to call them. I know Tandy sells them but they are far to expensive, I am not looking to mass produce products by any means just would rather get a whack of them for cheap compared to $4 a pop. Attached is a picture for reference. Thanks Try www.highdesertleather.com click on the do it yourself tab I have these items and others for sale Quote
Members Sixer Posted March 3, 2012 Members Report Posted March 3, 2012 (edited) Good luck.... I've scoured the intraweb with no luck at all in finding a good SUPPLIER. JRM is a waste of time... I literally talked to the lady there and confirmed that she recieved my faxed order. She told me that she would call me back with a total ASAP. That was 6-8 months ago... I mean seriously. At least do me the courtesy of telling me that you guys have no idea how to run a business and that I should look elsewhere. Anyhow, I still find it hard to believe that somebody out there isn't making these clips... or at least have a website of some kind. There has to be somebody out there that has a similar selection. I've been looking but only find one or two styles. I'm looking for something like this - it looks like it would lock on to pants without a belt pretty good. A request by a customer EDIT: Either of the top two clips EDIT AGAIN: I dialed the wrong number, got through to voice mail Edited March 3, 2012 by Sixer Quote
Members NoName Posted March 4, 2012 Members Report Posted March 4, 2012 I tried recently to order from JRM. I called and talked to a real person only to find that they want to sell by the thousand. They would be happy to send me a free sample but only on a single basis.... sure would like to get a couple dozen of the #3006 in black! Quote
Members steelhawk Posted March 4, 2012 Members Report Posted March 4, 2012 I've tried to order from JRM several times as well and got nowhere. I haven't found what I want anywhere else, either. Quote
Members Trevor Posted March 4, 2012 Members Report Posted March 4, 2012 Hey Guys Ive always got my clips from this supplier. use the slim ones for phone cases and radio pouches and the bigger ones for other stuff. Think he's in California somewhere. http://www.lowyusa.com/metal-fasteners/belt-bag-holster-hardware Good luck Trevor "Way down Under" Quote
Members NoName Posted March 5, 2012 Members Report Posted March 5, 2012 If you are willing to buy 250 at a time, theclip.com does a good quantity discount. Quote
Members BigRiverLeather Posted March 20, 2012 Members Report Posted March 20, 2012 UPDATE: I talked to the fine folks at JRM and there was no issue ordering a small quantity of clips, at least if it was a clip they had in stock which for me happened to be the 3007 (see chart above, top right. I ordered 30 clips at .90 eachwith the powder coat finish (.15 more than than the less durable black oxide) Quote
Members Rayban Posted March 20, 2012 Members Report Posted March 20, 2012 UPDATE: I talked to the fine folks at JRM and there was no issue ordering a small quantity of clips, at least if it was a clip they had in stock which for me happened to be the 3007 (see chart above, top right. I ordered 30 clips at .90 eachwith the powder coat finish (.15 more than than the less durable black oxide) Did you ask them if they had a problem answering phone calls and email messages? Quote
Members BigRiverLeather Posted March 20, 2012 Members Report Posted March 20, 2012 Did you ask them if they had a problem answering phone calls and email messages? Since they were curtious and had what I wanted at a good price, I took the high road. Quote
Members UncleGeorge Posted July 31, 2012 Members Report Posted July 31, 2012 (edited) Since they were curtious and had what I wanted at a good price, I took the high road. Did you receive your order? How were the clips? Sturdy enough for heavy pistol? Thanks, Uncle George Edited July 31, 2012 by UncleGeorge Quote
Members BigRiverLeather Posted July 31, 2012 Members Report Posted July 31, 2012 The product I received was top notch. I wouldn't hesitate to use them again. They would support heavy pistols very well assuming they were properly affixed to the holster by the maker. Quote
Members UncleGeorge Posted July 31, 2012 Members Report Posted July 31, 2012 thanks for the quick reply. I have an email into them, reckon I'll give'm a call. The product I received was top notch. I wouldn't hesitate to use them again. They would support heavy pistols very well assuming they were properly affixed to the holster by the maker. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.