Jump to content

Recommended Posts

  • Members
Posted

I happened across a Tippmann Aerostitch for sale on a classified ad website and decided to get it. I had it shipped from Montana to GA- It just came in yesterday, I went running out of the house barefoot to meet the UPS guy, lol.

Now I just need a bench to mount it to... oh, and a shop to work in :-/ and to learn how to use the thing. It may not be the Caddy of sewing machines, but something about the Aerostitch made me want one since I first saw them. I'm happy with my purchase, and have less invested thus far than I would've with a comparable electric machine.

Just thought I'd share :cheers: I'm sure I'll have questions for you experienced folk once I begin using it.

Nooj

post-14247-076588500 1299852574_thumb.jp

Those pieces of tape on the machine are "instructions" the previous owner put on to help me out ;-)

Posted

Good machine I really like mine. If you have any questions ask away. By the way Tippmann still supports these and thier Techs are very helpful don't hesitate to call them.

  • Members
Posted

bought one many years ago a little quirky but i love mine it can do about anything you throw it if you set it up right.i know a bit about them dont hesitate to ask any questions.

regarsd shovelhead

  • Members
Posted

Thanks for your offerings of help, yall! I'm certain there will be many times I'll call upon you for answers.

I bought a little 10 gallon horizontal 5hp Husky compressor, which I think will run it. I think it puts out 5.1cfm at 90psi. More than likely I'll be using the slowest possible setting to begin with, so my air demand won't be much, lol. At least until I'm comfortable enough to know I can go faster without sewing my fingers to the leather.

Nooj

  • Members
Posted

Well I've been running mine for quite a while now as well and I've learned way more than I can type out here about them:) Mine came, well not functioning, so I got the joy or fixing and building bits as needed. Now nearly a year later I finally have it working as well as it ever has, lots of little minor problems that I would bet most guys never see;) I think though I've replaced all the old parts that were worn out or broken when I got the machine and it should be pretty good and stable going forward. I would say my experience with the Aerostitch is that it's a great machine that can take a little tinkering from time to time to keep running right. That said, most of it is coarse enough work that it's fairly easy to keep going with parts and some phone help from Tippmann. Tom is the man to talk to down there about the Aerostitch's and I've spent quite a bit of time talking with him about my machine. Mine actually came out after the last manual, and they never produced one for my model, it's actually slightly different than all the 4 manuals they made;) So he at one point drew out a pneumatic diagram for me to redo the hose's and replace the missing ones.

Good luck and feel free to shout with questions, most everyone here who has posted myself included would be happy to help;) Enjoy the machine!

Luke

www.AdamsHolsters.com Custom holsters made for you.
  • Members
Posted

Thanks for the reply! I'm glad to know of someone who has dealt with minor details about the machine. When I got mine the first thread guide post was broken off and the air cylinder on top of the machine has a dent :-(

Luckily it came with an extra guide post... But I'm curious if the top cylinder will work with the dent, or if it will hinder the piston inside from moving freely (I can cycle it by hand- but being new I'm not sure how far it's supposed to go). I guess I'll figure it out once I run it; Or at least know what kinda questions to ask you guys.

Thanks again,

Nooj

  • Members
Posted

Over the past 40 years I have used quite a few different machines. I have been using the aero for a good 15 yrs and it does it all, leather, nylon and sheep or

artifical fleece. You can't beat the price or the tech support. Am sure you are going to be plum pleased with your choice.

"Roll a brown paper cigarette"

  • Members
Posted

Thanks for the reply! I'm glad to know of someone who has dealt with minor details about the machine. When I got mine the first thread guide post was broken off and the air cylinder on top of the machine has a dent :-(

Luckily it came with an extra guide post... But I'm curious if the top cylinder will work with the dent, or if it will hinder the piston inside from moving freely (I can cycle it by hand- but being new I'm not sure how far it's supposed to go). I guess I'll figure it out once I run it; Or at least know what kinda questions to ask you guys.

Thanks again,

Nooj

Are you talking about the presser foot cylinder? I've not actually taken the cylinders apart, but depending on how they are sealed and how the piston is built it might work. If you can cycle it by hand then I would say there is a pretty good chance it will work fine. I can't think of anything it would hurt other than the cylinder itself if it didn't work so I would go for it;)

Take care!

Luke

www.AdamsHolsters.com Custom holsters made for you.
  • Members
Posted

It's not the presser foot cylinder... It's on the very top and has the thread going through a hole in the end of the shaft. The 'take up cylinder' I think it's called.

Unfortunately I haven't had the time (nor a workbench or workshop) to test it out yet :-/ But it seems to have a decent amount of travel so perhaps it's ok :-)

Nooj

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...