Bronc Halter Pattern

[InspiredTurquoiseTack]

Hello,

Does anyone have or know where I can get a bronc halter pattern? I actually only need the pattern for the nose piece, the rest I will use nylon. I would appreciate it very much.

Thanks,

Gail

[dirtclod]

I would draw my own and save the money even if somebody makes a pattern.

[InspiredTurquoiseTack]

That was helpful.

Edited April 1, 2011 by InspiredTurquoiseTack

[wvcraftsman]

I've never seen a pattern, but there are lots of pictures on here of ones that people have made. You might try asking some of those folks or look at the photos to see if you can draw one up by looking at the pics. If you don't feel comfortable making one by looking at the pics, just contact one of those folks. I bet it wouldn't cost much, everyone on here is pretty helpful. Just give it some time for everyone to look at your post.

[Deb59]

I don't know if you have a Tandy shop close, or if the manager keeps back issues of the Skiver flyer that comes out each month, but there was a pattern in one that came out I think it was sometime in late 2009. I am looking for my copy, If I find it I will let you know.

[InspiredTurquoiseTack]

That would be great, I appreciate it. I just need a few dimensions to get started and can customize thereafter. There is no Tandy store around (wish there were!) and I know that I have heard they had a pattern at one time.

[royslsbry]

Here's a scan of one of mine you can copy. Hopefully you can print it out and it will be the exact size. If not copy it to paint or word and stretch it out. It is 15.5 inches long and 3.5 in the middle you can make it wider. It tapers down at the ends to 1 inch. Hope this helps. Roy

[InspiredTurquoiseTack]

Thank you roysisbry! I appreciate it very much, it's a gorgeous nose piece! It's the exact shape I was looking for with the tab sides for conchos.

[royslsbry]

Glad I could help. Roy