My Latest Threepersons

[mattsh]

It's been a while since I have posted anything. Family issues have been taking up the bulk of my time these past 2 months. Things are on the up-and-up now so here is the latest. I made this one for my brother's S&W 19 in 6 inch. I imagine my Dad will be wanting one soon since he just recently purchased a S&W 19 in 4 inch.

[Rayban]

Nice clean solid work....I like.

I still cringe at that much trigger exposed, but I guess that's just my own insecurities.

[Lobo]

Nice clean solid work....I like.

I still cringe at that much trigger exposed, but I guess that's just my own insecurities.

Let's see now:

Smith & Wesson Model 19 double action revolver.

Approx. 18 lbs. trigger pull required (in double action mode).

Internal safety block, requiring that the trigger be held firmly at the rear of the stroke for the firing pin to reach a primer.

Strap over the hammer, prevents the weapon from cocking or firing.

Tens of thousands of working cops carried double action revolvers in holsters with exposed trigger guards for nearly a century without significant problems reported.

Summary: No significant safety issues involved.

Covered trigger guards only started to become an issue over the past 20 years or so, as many law enforcement agencies adopted striker-fired pistols with little or nothing in the way of mechanical safety devices (like the Glocks). Since then human error, lack of adequate training, and stupidity have resulted in many unintentional discharges, trigger guard coverage has become a big issue, and many public and private ranges (and instructors) have been forced to require holsters with covered trigger guards, largely to protect against lawsuits brought by folks that continue to commit human errors and engage in stupid practices.

I can also envision lawsuits based upon an argument that an unintentional discharge occurred while the pistol was being holstered with the user's finger inside the trigger guard, and that would not have happened if the holster had been made with an open trigger guard! When tragedies occur there will always be some finger-pointing going on, and lawyers can argue any case in any way that suits the needs of their clients in laying the blame on someone else, anyone other than the dimwit that caused the accident.

A very nice example of the classic Tom Threeperson's style. Should provide very good, and safe, service for the life of its owner, assuming that the owner has been properly trained in safe handling procedures for the double action revolver.

Best regards.

[Rayban]

I implied that it was my own personal preference Lobo.....you don't have to get all side ways about it....oh wait....you're always that way....

Matt, I do like the holster.

[Denster]

I implied that it was my own personal preference Lobo.....you don't have to get all side ways about it....oh wait....you're always that way....

Matt, I do like the holster.

Was that really called for?

[Lobo]

I implied that it was my own personal preference Lobo.....you don't have to get all side ways about it....oh wait....you're always that way....

Matt, I do like the holster.

Rayban:

You are right; I am always that way. Logic and common sense seem to drive my thinking far more than any other forces. I've carried a sidearm just about every day since 1968, much of that time using double-action revolvers in holsters with open trigger guard areas. I continue to produce the classic Threepersons' style holsters for those who value the traditional design, and I have commissioned (read: "spent the money to have the work done") carving artists to recreate the original carving pattern of Tom Threepersons' personal holster, now in a private collection. The results remain very much in demand, regardless of the prejudice against open trigger guards now prevalent due to the common use of certain handgun designs that seem to have developed a history of accidents.

I see in your bio that you are interested in "beer research". You might be interested to learn that I was awarded first prize at the State Fair home-brewing competition for my home-made beer, some 19 years ago. I extend an open invitation for you to stop by and have a taste of real beer, maybe a cigar or two, any time you are in the area. I will also provide spine-tingling tales of personal history from my colorful life as we pop a few caps, tip a few bottles, and sample a brew or two. Then we can go to the range! The Fed's aren't the only people who understand the connection between Alcohol, Tobacco, and Firearms!

Best regards.

[Frank]

It's a nice holster and one of my favorites. I also carry one on a regular basis thanks to Lobo's generosity.

Lobo, I guess chivalry is not dead. I applaud you for taking the high road. I never guessed it any other way.

Frank

[Rayban]

Lobo, I may take you up on that, we're planning a trip to Monument later this summer, as I continue my study of fine Colorado micro brews......oh, and we have a a son and grand-daughter there too.

I would also look forward to seeing examples of, and hearing tales of Tom Threepersons.....but cigar.....I dunno.....(?)

[mattsh]

Thanks guys for the compliments and side commentary I always enjoy hearing about other people's hobbies. I see it as a reflection of a persons personality.