Members LilRay Posted April 28, 2011 Members Report Posted April 28, 2011 (edited) Two new Craftool overstitchers (the interchangable ones) with lots of play laterally in the wheels. What can I do to fix this? As a newbie a tool that doesn't function properly is utterly frustrating. I don't have the cash right now to buy a better brand, infact these were gifted to me by a family member. Both are brand new. God Bless, Ray Edited April 28, 2011 by LilRay Quote
dirtclod Posted April 29, 2011 Report Posted April 29, 2011 Try putting a small washer or two in to fill out the space. Quote
Members HellfireJack Posted April 29, 2011 Members Report Posted April 29, 2011 I had the same issue when I bought the embossing wheels for that tool. A little gentle persuasion with a pair of pliers did the trick. Light squeeze, check fit, repeat as necessary. Quote
Members LilRay Posted April 29, 2011 Author Members Report Posted April 29, 2011 I had the same issue when I bought the embossing wheels for that tool. A little gentle persuasion with a pair of pliers did the trick. Light squeeze, check fit, repeat as necessary. You mean I get to mash something with pliers? God Bless, Ray Quote
Ambassador Luke Hatley Posted April 29, 2011 Ambassador Report Posted April 29, 2011 You mean I get to mash something with pliers? God Bless, Ray ..... AND DO IT VERY CAREFULL..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.