Jump to content

Recommended Posts

  • Members
Posted

Been looking all over the place for 2-3 oz tooling sides, veg tan....seems nobody has them...or they charge ( hold on to your chair...!!!) about 7.50 for a sf....in Montana....haha...

So, I am a bit tide....and also do not need "A" quality, tannery run would be fine.....seems like there is not much out there....in this thin 2-3 oz...?!

Has anybody a good source for esonable prized 2-3 oz tooling leather in natural color...? I use this for custom bike seat's...the skirt part.....

Thanks so much

James

http://www.elfwood.com/~alien883

First it is just leather....then it is what-ever I can dream off...

  • Contributing Member
Posted

http://springfieldle...ft%2C2-3ozFull/

http://springfieldleather.com/product/4759/Side%2CTooling%2CSoft%2C2-3ozFull/

One is listed as "soft", which might work better for seats. The other is presumably a harder temper.

Mike DeLoach

Esse Quam Videri (Be rather than Seem)

"Don't learn the tricks of the trade.....Learn the trade."

"Teach what you know......Learn what you don't."

LEATHER ARTISAN'S DIGITAL GUILD on Facebook.

  • 2 weeks later...
Posted

If you call Wickett & Craig and/or Hermann Oak, they will usually skive your leather down to your desired ounce if you request it.

Greetings from Central Texas!

The Grain Side Up blog


#TheGrainSideUp

  • Members
Posted

Tandy is running 2-3 oz sides for $39.99, they are #2

Where did you see that? I can't find it.

  • Members
Posted

That is what I was referring to. I was able to go and look at them, pretty decent. I saw no brands or wrinkles, a few knife holes but nothing major.

Times are Hard

  • Members
Posted

I can get 2-3 ounce...give me a buzz Tim Judd, Tanglefoot Traders, Inc. (888.812.9121)

  • Members
Posted

Thanks for all the info.....most of the leads are more than I can afford for 2-3 oz leather.....but over all leather has gotten so terrible expensive since 2 years ago....no fun in buying leather any more...!!

And then there is Tandy, low quality....no good service and the guy on the phone has no clue what he is talking about...

Well, I called Tandy in desperation....seems like they have some 2-3 oz on sale and the dude said it is fairly well quality.......so guess what, I will jump the gun and try Tandy's....we will see...

I keep ya all posted!!

Thanks

Jimbob

http://www.elfwood.com/~alien883

First it is just leather....then it is what-ever I can dream off...

Posted

Thanks for all the info.....most of the leads are more than I can afford for 2-3 oz leather.....but over all leather has gotten so terrible expensive since 2 years ago....no fun in buying leather any more...!!

And then there is Tandy, low quality....no good service and the guy on the phone has no clue what he is talking about...

Well, I called Tandy in desperation....seems like they have some 2-3 oz on sale and the dude said it is fairly well quality.......so guess what, I will jump the gun and try Tandy's....we will see...

That's too bad. I have always had a good experience when I call or go to the Tandy near Boston, Lubbock Tx and Santa Fe NM.

  • 7 months later...
  • Members
Posted

I use a lot of Tandy products. Not their leather though because there are other options (how many places can ya get eco-flo or water based products?) because I will quit leatherworking altogether before i buy Chinese leather. I don't understand them, have to be the biggest leather supply company in the US and not one USA product?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...