KitKat Report post Posted September 28, 2011 (edited) Unfortunately we are going out of business to to a health issue in the family. Hubby is going to need surgery and will be off work some 4 months or more so we need to raise some $$ as quickly as possible. I have listed our Cobra Class 4 machine if anyone is interested in it. I also have the following for sale. If you would like pictures please send me a message. 1. 1 1/2" NEW Master Tools x Weaver Leather Concho Cutter - $69.00 2. 3" X 4 3/4" Leather Cross Shape Cutter $49.00 3. Wood handled Edgers #3, #5 4. 5/8" Bridle Buckles 5 1/2" Bridle Buckles 6 3/4" Bridle Buckles 7. 1" Bridle Buckles 8. Assorted sizes of heavy duty snaps for harness hold back straps 5/8" & 3/4" 9. One ear sliding headstall hardware (weaver) 10 Assorted sizes of leather Conchos 11. Bright silver pico berry conchos 12 Assorted sizes & colors of flat back Swarkoski Crystal rhinestones. 13. Heavy harness leather straps 5/8" & some 3/4" (russet ) 14 Heavy harness leather reins (uncut & unfinished) 15 assorted sizes O-Rings, & halter hardware Scrap harness leather Scrap 9oz tooling leather Scrap Black & White & Brindle Hair on Cowhide Partial side light weight chap leather 4" Leather splitter 2 T Jack Drimmel w/ attachment kit 12 T Press I have a few hand tools leavt. but a big kit is on eBay right now. Thanks for looking! Edited September 28, 2011 by KitKat Share this post Link to post Share on other sites
CWR Report post Posted September 28, 2011 (edited) Could you tell me a little more on the harness leather. What length is the strap and how much of the 5/8 and 3/4 is there? What are the dimensions and lenght of the reins? What weight is it? cost of the whole lot? Thank you and I pray for your husbands recovery, CW Edited September 28, 2011 by CWR Share this post Link to post Share on other sites
KitKat Report post Posted September 28, 2011 Could you tell me a little more on the harness leather. What length is the strap and how much of the 5/8 and 3/4 is there? What are the dimensions and lenght of the reins? What weight is it? Thank you and I pray for your husbands recovery, CW Hi CW, Thank you for your prayers! The leather is from weaver leather and it is Chahin light Russet Harness leather. Its 12+ oz. It was one of the heavier weight hide's I've received from them. there are 8 rein sets that were cut by weaver. They are 5/8" wide by 7-8ft long. (none shorter than 7ft) There are 4 sets that are right at 9ft long as well. Of the chahin Harness there are a few golden brown sets. These are also 12" oz. There is one that is 5/8" x 7ft and there are 3 sets that are 3/4" x 7ft. I have a HUGE box of the same 12+ oz leathers that are in shorter lengths ranging from 2 - 6ft in length. All the leather is finished on the back side as well. They have not been edged or the ends punched. Let me know if you would like some pictures... Thanks again, cheryl Share this post Link to post Share on other sites
King's X Report post Posted September 28, 2011 Cheryl Sorry to hear about your time of need. Can I ask you about the 4" splitter? I am also interested in maybe a medium box of the heavy scrap leather. Thanks and good luck! Share this post Link to post Share on other sites
Aggiebraider Report post Posted September 28, 2011 Howdy Cheryl, I am interested in the harness leather as well so if CWR doesnt take it let me know how much you want for it. I would also be interested in the smaller stuff (2-6 ft) as well. I am also interested in the Dremmel. If you could please let me know the model number and what attachments come with it and how much you want for it. If a pic is easier thats fine. Thanks, Calvin Share this post Link to post Share on other sites
KitKat Report post Posted September 29, 2011 Thanks for the inquiry's everyone. I'll take some pictures of this stuff tomorrow and get it posted on here. Then if you'd like to make offers on it, that would be great. Thanks again, Cheryl Share this post Link to post Share on other sites
KitKat Report post Posted September 29, 2011 Hi There, I have created a website and have started listing the inventory available for sale. Here is the link to the site. It is far from finished, but the machine, leather and items everyone has requested are up.... My link Thanks again Cheryl Share this post Link to post Share on other sites
King's X Report post Posted September 29, 2011 Cheryl.. The link was bad. There was nothing there but the hosting page. Share this post Link to post Share on other sites
KitKat Report post Posted September 29, 2011 (edited) Thanks for bringing this to my attention. Try this link in a bit. I guess they are checking the site for what ever reason.... Sorry about the delay! http://www.circler.net46.net Edited September 29, 2011 by KitKat Share this post Link to post Share on other sites
KitKat Report post Posted September 30, 2011 (edited) Still no word from the support department on the website, anyway, here are a few pictures of some of the things available. Picture # 21 - - 2 - Horse size Crupper Picture # 27 - - 2 - Half Cheek Snaffle bits w/ 5" mouthpeices (stainless & rubber) Picture # 25 - - 5 - Whip Sockets - 4 Stainless & 1 Black Iron Picture # 28 & 34 - - Heavy Harness Leather Rein Straps 5/8" X 9ft 12+ oz Picture # 29 & #30 (see pic in thread below) Heavy Harness leather Rein Straps 5/8" X 7ft 11" 12+oz Picture # 11 - - - D Rings - 54 5/8" & 20 - 3/4" Picture # 12 - - 15 - 1" Roller Buckles Picture #14 - - 10 - 3/4" Twin Loops Picture # 15 - - 55 Nickel Plate Bridle Buckles (image color is off) Picture # 16 - - 2 POUND bag of assorted squares Feel Free to make offers on this stuff. All of it is NEW and 99% of it was ordered from Weaver Leather Edited September 30, 2011 by KitKat Share this post Link to post Share on other sites
KitKat Report post Posted September 30, 2011 (edited) More..... Picture # 30 (see above) Picture # 35 Heavy Harness Leather Rein straps (Light Brown ) 2 sets 5/8" x 7ft & 3 sets 3/4" x 7ft Picture # 36 Scrap Harness leather peices (not really scrap, just a big box I've stored all the smaller length rein straps in as well as left over peices from hides Picture # 31 Craft Tool 4 3/4" Leather Splitter - $60.00 (tool needs dusted, but its a little over a year old, blade still sharp) Pictue # 32 Dremel w/ Stand, carry case, along with bits, sanders etc that goes with it. $45.00 Picture # 002 Nickel 3/4" - 3 sided halter hardware w/ O rings Picture # 003 - NP O-Rings 2 - 1 1/2", 3 1 1/4", 30 - 1" , 2 - 1 1/4" are Brass Picture # 004 3/4" Bridle buckles with 3/4" ear slides Picture # 005 6 3/4" buckles (np) Picture # 006 26 5/8" Bridle buckles Picture # 007 54 NP Buckles Edited September 30, 2011 by KitKat Share this post Link to post Share on other sites
King's X Report post Posted September 30, 2011 Picture #31 the Tandy Skiver. I will take it if still available. How much do you want for the large box of scraps? I am looking for large pieces not so much the reins. I want to make some leather molds for different project and I am looking for the thick leather scraps. Just let me know. Thanks. Share this post Link to post Share on other sites
KitKat Report post Posted September 30, 2011 Picture #31 the Tandy Skiver. I will take it if still available. How much do you want for the large box of scraps? I am looking for large pieces not so much the reins. I want to make some leather molds for different project and I am looking for the thick leather scraps. Just let me know. Thanks. Hi There, Thanks, I'll consider the skiver sold :-) As to the large scraps... I'll take some pictures of what I have. To be honest I really dont have a clue what the stuff is worth so with that in mind, just shoot me a offer for it. What you think is fair. Let me get the pic's up first though to be sure its what you are looking for :-) Thanks, Cheryl Share this post Link to post Share on other sites
KitKat Report post Posted September 30, 2011 Hi King's X Here is a Picture of the scraps. Will this work for you? Share this post Link to post Share on other sites
Aggiebraider Report post Posted September 30, 2011 (edited) Hey Cheryl, Ill take the Dremel, and I am interested in all of the reins and shorter pieces, so just let me know what you want for it all. Ill also take the bridle buckles and slide ear adapters. Thanks, Calvin Edited September 30, 2011 by Aggiebraider Share this post Link to post Share on other sites
KitKat Report post Posted September 30, 2011 Hey Cheryl, Ill take the Dremel, and I am interested in all of the reins and shorter pieces, so just let me know what you want for it all. Ill also take the bridle buckles and slide ear adapters. Thanks, Calvin Hi Calvin, Thanks Calvin, I'll consider the dremel sold!! Which bridle buckles are you interested in? There are 5/8, & 3/4" I'll get back to you on the prices for the reins and shorter peices. BTW - I have more stuff that I haven't posted pictures of yet. Will post more of them later today. Beta Biothane, and other snaps, buckles etc... Thanks again, everyone! Your help has been sincerely appreciated!!! Share this post Link to post Share on other sites
equiss Report post Posted September 30, 2011 Hi Cheryl - I am interested in the cross cutout - do you have to use a machine or is it the kind that you can use a hammer with? Please send me a Private message and a picture if you can, but I am really interested in it! Thank you! Charlene Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted October 1, 2011 Hello, sorry to hear about your husband, and I hope he makes a quick recovery. The item that I am interested in is the assorted rhinestones. What sizes, and colors do you have? I am looking for a bunch of 3-4mm clear, but I will consider other sizes/colors. I have been looking for some for my Halloween costume. Share this post Link to post Share on other sites
Aggiebraider Report post Posted October 1, 2011 How many buckles of each size do you have? If its just the two Ill take both Share this post Link to post Share on other sites
KitKat Report post Posted October 1, 2011 Hello, sorry to hear about your husband, and I hope he makes a quick recovery. The item that I am interested in is the assorted rhinestones. What sizes, and colors do you have? I am looking for a bunch of 3-4mm clear, but I will consider other sizes/colors. I have been looking for some for my Halloween costume. Thanks, BIGGUNDOCTOR, I'm sorry but I don't have any in that size in a clear. All are 7 & 10mm Kings's X, aggiebraider & equiss, I've sent ya a pm Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted October 1, 2011 (edited) Thanks, BIGGUNDOCTOR, I'm sorry but I don't have any in that size in a clear. All are 7 & 10mm Kings's X, aggiebraider & equiss, I've sent ya a pm I would still be interested in seeing what you have for other projects. Can you PM me a list, and a price? I tried contacting you through the link you posted, but it says incorrect email address. Edited October 1, 2011 by BIGGUNDOCTOR Share this post Link to post Share on other sites
KitKat Report post Posted October 6, 2011 Hello everyne This is a list of the items that have been sold so far :-) A special thanks to everyone who has purchased these items! Dremmel Concho Cutter Leather Splitter Scrap Leather Rein Straps Large ebay tool kit Weaver Bridle buckles Cobra Class 4 Sewing Machine 1/2" & 3/4" center bar bridle buckles I still have alot of the hardware leav't., Driving bits, cruppers and Beta Biothane as shown below 3/4" , 1", 1 1/4", 1 1/2" 2" all in BLK. (not a very good picture) This is the 2 groove that the amish use to build harnesses from. I also have 1" Beta Biothane available in 2 different shades of brown. This is the "super heavy". Will sell these by the foot w/ 5ft minimum. if you are interested in trying beta Biothane on one of your projects heres your chance!!! Thanks again everyone! Cheryl Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted October 7, 2011 Hey KitKat, still interested in the rhinestones even though you don't have the original size I wanted. Can you please send a list of what you have? Thanks Share this post Link to post Share on other sites
KitKat Report post Posted October 7, 2011 Hey KitKat, still interested in the rhinestones even though you don't have the original size I wanted. Can you please send a list of what you have? Thanks Hi there, I'm sorry BIGGUNDOCTOR, My neice has talked me out of what's leavt. I guess her and her horsey friends want to make some blingie wristbands and key chains with them. I've sent u a PM as well... Sorry bout that, Cheryl Share this post Link to post Share on other sites
Railrider1920 Report post Posted November 18, 2011 1317236870[/url]' post='215235']12 T Press I have a few hand tools leavt. Thanks for looking! Hi, I hope that your husbands health improves signicantly. I am new to leather working and looking for some beginners tools. If you still have them, what type of hand tools do you have that are not in the box Lott on eBay? Can I see a pic of the 12 ton press?i it might be something I could use for something other than leather work. ThanksRob Share this post Link to post Share on other sites
