HandyAndy Report post Posted June 17, 2008 I was wondering how many of you have fabricated new or altered existing tools to fit your needs. I have made a few jigs but I am always looking for inspiration as I am sure we all are. I will post some pics of my stuff when I find my camera. Quote Share this post Link to post Share on other sites
JohnD Report post Posted June 26, 2008 I know that this post is probably worthless without pics, But I still don't have a suitable camera. I have made a few different petal lifters out of screwdrivers, a few different stamps, pear shaders, etc. I have also made a folder/ burnisher out of hardwood to work specifically with a pattern that I make regularly. There used to be a few threads around about homemade tools, I think it is a great topic and always look forward to seeing what other folks come up with. John Quote Share this post Link to post Share on other sites
HandyAndy Report post Posted July 9, 2008 (edited) I just made a smaller burnisher for my Dremel! I got a 1/2"long, 3/8 wide nylon spacer for 25 cents. I hammered a cutting blade mandrel into the hole then used a needle file to shape the groove. Sorry for the cell phone quality. It is great for getting into tight spaces! And I can still use it as a mandrel! Edited July 9, 2008 by HandyAndy Quote Share this post Link to post Share on other sites
OutBackP Report post Posted August 11, 2008 Was messing about with my camera and thought I'd take a picture of my home made creasers. The first one is my most used, made from 11mm (7/16") mild steel from a old rusted out gate. It creases a line about 3mm from the edge. All file work so very easy to make. The second i use for any free hand creasing or if I need to use heat for my creases. Again made from an old gate. Quote Share this post Link to post Share on other sites
Rawhide Report post Posted August 11, 2008 I haven't made any tools, but I sure modify the heck out of them. If it doesn't work the way I want it to, I file it, bend it, polish it, cut it, etc... 'til it does what I want it to, how I want it to. Marlon Quote Share this post Link to post Share on other sites
DCKNIVES Report post Posted August 11, 2008 This is a punching setup I built for my drill press.The table is made from aluminum and covered with UHMW a very slick plastic. I used boards with notches(for the belt loops) to punch on and the plastic allows for easy movement. I punch using various size drill bits with sharpened shanks and the drill press running. I modified this arbor press for putting my makers mark on my knives and sheaths. I just milled a slot in the ram and tapped a couple of holes for set screws. My mentor and friend Sandy Morrissey made this stamp for me while showing me his technique for tooling faux snakeskin inlays. This is a sheath done using this stamp and technique Hope you like everything.Dave Quote Share this post Link to post Share on other sites
charley Report post Posted August 12, 2008 My mentor and friend Sandy Morrissey made this stamp for me while showing me his technique for tooling faux snakeskin inlays.<snip> Hope you like everything.Dave Can you show a close-up of the impression from that stamp? Or a higher res image for the sheath? It looks really good... --charley Quote Share this post Link to post Share on other sites
DCKNIVES Report post Posted August 12, 2008 Charley, looked to see if I had anything closer.Try this, a little better to see.Dave Quote Share this post Link to post Share on other sites
HandyAndy Report post Posted August 12, 2008 Wow! I'm totally making one of those snake scale stamps! Quote Share this post Link to post Share on other sites
cybertracy Report post Posted August 12, 2008 [ My mentor and friend Sandy Morrissey made this stamp for me while showing me his technique for tooling faux snakeskin inlays. Dave, was the snakeskin stamp made from scratch or modified from another stamp? Awesome effect! Quote Share this post Link to post Share on other sites
DCKNIVES Report post Posted August 12, 2008 Sandy made this from scratch as he does many of his stamps.He uses long stainless hex head bolts 1/4"-5/16" with at least a 4" shank.Shape with files and sanders.Dave Not a good pic just a scan, but it shows some of Sandy's carving and tooling skills in a sheath he gifted me. Quote Share this post Link to post Share on other sites
Rolf Report post Posted August 20, 2008 (edited) I just made a smaller burnisher for my Dremel! I got a 1/2"long, 3/8 wide nylon spacer for 25 cents. I hammered a cutting blade mandrel into the hole then used a needle file to shape the groove. Sorry for the cell phone quality. It is great for getting into tight spaces! And I can still use it as a mandrel! wow great tool, thanks for your post and the picture! Edited August 20, 2008 by Rolf Quote Share this post Link to post Share on other sites
SmkyTheBr Report post Posted August 21, 2008 I used a plastic edge slicker from Tandy and inserted one of the rubber spreader attachments for the Dremel used for the sanding wheels, it fit perfect and works great. Tom Quote Share this post Link to post Share on other sites
carr52 Report post Posted August 21, 2008 I made this knife from deer. horn Just drilled a hole for the blade and then drilled and tapped holes on the side to hold the blade in place. Need some kind of finger rest on top. I used it on this holster and it worked fine. Tom Quote Share this post Link to post Share on other sites
