Members watersnake Posted November 18, 2011 Members Report Posted November 18, 2011 Could anyone tell me if Ruby blades need to be sharpened when they are in constant use .. If so what do you use to sharpen then Ron Quote I'd rather be a has been , than a never was at all
Members swinewerx Posted November 18, 2011 Members Report Posted November 18, 2011 Don't dare attempt to sharpen!!! They are antiques! I beleive they are anyways!!! I have one, and prefer it rather than the ceramic ones I have, and ceramics don't need sharpening either!!! Quote Still trying to figure out what is going on out there in the custom/one off world
Members Tina Posted November 18, 2011 Members Report Posted November 18, 2011 On 11/18/2011 at 4:34 AM, watersnake said: Could anyone tell me if Ruby blades need to be sharpened when they are in constant use .. If so what do you use to sharpen then Ron Me too have a couple of them :-) I only strop them on leather, thats enough to get them sharp again. Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Members watersnake Posted November 18, 2011 Author Members Report Posted November 18, 2011 Don't dare attempt to sharpen!!! They are antiques! I beleive they are anyways!!! I have one, and prefer it rather than the ceramic ones I have, and ceramics don't need sharpening either!!! Thank you Me too have a couple of them :-) I only strop them on leather, thats enough to get them sharp again. Thank you Me too have a couple of them :-) I only strop them on leather, thats enough to get them sharp again. Thank you Me too have a couple of them :-) I only strop them on leather, thats enough to get them sharp again. Thank you Me too have a couple of them :-) I only strop them on leather, thats enough to get them sharp again. Thank you Quote I'd rather be a has been , than a never was at all
Members WyomingSlick Posted November 18, 2011 Members Report Posted November 18, 2011 On 11/18/2011 at 4:34 AM, watersnake said: Could anyone tell me if Ruby blades need to be sharpened when they are in constant use .. If so what do you use to sharpen then Ron Actually Ron, they can be sharpened. But, because of what they are, that is "RUBY", which is only one step down from diamond, which is the top of the hardness scale, the only thing that is going to work is a diamond stone and/or diamond paste. The "rubyat blade" was designed and produced to never need conventional sharpening and never should - unless: the edge is damaged. The original listing in the Tandy catalog stated : "Rubyat Ever-sharp Gem Ruby Blade NEVER needs sharpening, stropping, or honing." Tina is absolutely right - only strop them on a clean piece of leather. This should pull of any residue which is causing the blade to drag. For tough gunk, soak a bit in soapy water. Do not use any solvents which may break the cement bond between the ruby and the brass! Technically, stropping them on any strap with compound should not hurt them since ruby is harder than stropping compounds, unless they are ruby or diamond based. But then, they won't do you any good either. As to sharpening: if the blade is nicked, then it will require re-sharpening. I believe it has been stated on here that Bob Beard, the toolmaker, offers this service. I haven't tried him since I'm kinda of a do-it-myself guy. I had one chipped rubyat blade that was my brother's when we were kids. I put it back in action by carefully honing it back to a sharp point on a bonded fine diamond honing plate and finished polishing it up with diamond paste on a piece of thick plate glass. I have also used the diamond paste on glass to polish up ceramic blades that were dragging a bit. I actually do not use any of my rubyat blades often as the ceramic blades work just as good, and are much easily replaced. The only problem with ceramic blades is that they do not come in some of the thicknesses that I prefer. And basically" a properly sharpened steel blade will cut that hide fine as it is much harder than any piece of leather. Quote (John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV) And the truth is that religion is nothing more than the lame attempt by largely ignorant people to bring sense and order to a world that was beyond their comprehension. Once you see religion for the delusional and superstitious artifact it is............... you will be free !
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.