Members Shooter McGavin Posted December 28, 2011 Members Report Posted December 28, 2011 I am selling some solid brass belt loop staples. These are most commonly used to secure the ends of your belt keepers instead of sewing or using ordinary paper staples. Selling 20 pieces for 3 dollars, plus 1 dollar shipping no matter the quantity. Thanks!
raysouth Posted January 18, 2012 Report Posted January 18, 2012 Howdy Shooter, Please tell me the size of these staples. Thanks, Ray On 12/28/2011 at 4:25 PM, Shooter McGavin said: I am selling some solid brass belt loop staples. These are most commonly used to secure the ends of your belt keepers instead of sewing or using ordinary paper staples. Selling 20 pieces for 3 dollars, plus 1 dollar shipping no matter the quantity. Thanks!
Members Shooter McGavin Posted January 18, 2012 Author Members Report Posted January 18, 2012 Hello, They are 0.40" from prong to prong and 0.205" wide at the widest portion. The prongs are 0.265" long.
Members red3 Posted May 10, 2012 Members Report Posted May 10, 2012 On 1/18/2012 at 10:20 PM, Shooter McGavin said: Hello, They are 0.40" from prong to prong and 0.205" wide at the widest portion. The prongs are 0.265" long. Do you still have some of these for sale? If not where do you get them?
Members Shooter McGavin Posted May 10, 2012 Author Members Report Posted May 10, 2012 These are still available. paypal works best dan at zlogonje dot com is my paypal addy.
Members renegadelizard Posted November 29, 2012 Members Report Posted November 29, 2012 On 5/10/2012 at 3:38 AM, Shooter McGavin said: These are still available. paypal works best dan at zlogonje dot com is my paypal addy. Hey Shooter, i know its a long shot, but do you have any of these left? If not, is there another supplier besides weaver?
Members Shooter McGavin Posted November 29, 2012 Author Members Report Posted November 29, 2012 I certainly do. Let me know how many you need. Paypal address is still the same as above. Thanks!
Members Bluesman Posted November 29, 2012 Members Report Posted November 29, 2012 What is the best way to install? I would assume you make two holes insert and then bend tabs with a vise and or pliers. this sound right?
Members renegadelizard Posted November 29, 2012 Members Report Posted November 29, 2012 On 11/29/2012 at 11:55 AM, Shooter McGavin said: I certainly do. Let me know how many you need. Paypal address is still the same as above. Thanks! Hey Dan, ill start with just 20...paypal sent.. Thanks Don
Members Shooter McGavin Posted November 30, 2012 Author Members Report Posted November 30, 2012 Got it. Will send out USPS tomorrow. Thanks!
Trox Posted December 2, 2012 Report Posted December 2, 2012 Do you need a big industrial stapler to install these, or is it small (less expensive) hand held models available for sale. These sure look more professional than the rapid staples. Thanks Trox
Members Bluesman Posted December 2, 2012 Members Report Posted December 2, 2012 Would like to buy 40 but could use an installation reply.................
Members Shooter McGavin Posted December 2, 2012 Author Members Report Posted December 2, 2012 On 12/2/2012 at 4:05 AM, Trox said: Do you need a big industrial stapler to install these, or is it small (less expensive) hand held models available for sale. These sure look more professional than the rapid staples. Thanks Trox On 12/2/2012 at 4:08 AM, Bluesman said: Would like to buy 40 but could use an installation reply................. Sorry Bluesman, I didnt even see your post. I had to scroll up to figure out what you were talking about. But you nailed it. I poke two holes with a stitching awl, stick the prongs through, and then use needlenose pliers to flatten/bend/smash the prongs down tight. Thanks!
Members Bluesman Posted December 2, 2012 Members Report Posted December 2, 2012 thanks, just sent $10 for 60 plus shipping Jon
Members Shooter McGavin Posted December 2, 2012 Author Members Report Posted December 2, 2012 Got it! Will send out tomorrow. Thanks!
Members Shooter McGavin Posted December 3, 2012 Author Members Report Posted December 3, 2012 Hey guys, Paypal doesnt want to give me your addresses. Can you PM them to me please? Thanks!
Members billymac814 Posted December 27, 2012 Members Report Posted December 27, 2012 I have thousands of these things that came with my shop, they work great for belt loops and I use them on occasion as a bottom stop for zippers. I'd imagine there's a machine that installs them but I poke two holes and bend them with needle nose.
Trox Posted December 28, 2012 Report Posted December 28, 2012 On 12/28/2011 at 4:25 PM, Shooter McGavin said: I am selling some solid brass belt loop staples. These are most commonly used to secure the ends of your belt keepers instead of sewing or using ordinary paper staples. Selling 20 pieces for 3 dollars, plus 1 dollar shipping no matter the quantity. Thanks! Hi, do you still have these for sale? could you ship some to Norway, I like to try them out please. Tor
Members Shooter McGavin Posted December 28, 2012 Author Members Report Posted December 28, 2012 I could certainly send some to Norway if you are willing to pay the shipping. Thanks
Trox Posted December 28, 2012 Report Posted December 28, 2012 On 12/28/2012 at 3:12 AM, Shooter McGavin said: I could certainly send some to Norway if you are willing to pay the shipping. Thanks Thank you Shooter, yes of course I will pay the shipping. I am used to order stuff from your country. It is important to keep the total under 35 $ to avoid Norwegian tax on it. Could you please calculate how many you can send me for that amount (included shipping) I better send you an email. Email sent. Thanks Tor
Trox Posted December 28, 2012 Report Posted December 28, 2012 On 12/28/2012 at 3:12 AM, Shooter McGavin said: I could certainly send some to Norway if you are willing to pay the shipping. Thanks I off to to bed, I will answer your email tomorrow. Thanks Tor
Members Hellwegs Posted July 29, 2013 Members Report Posted July 29, 2013 I'll Take 100 or so if you still have them.
Members Hellwegs Posted July 30, 2013 Members Report Posted July 30, 2013 Ok shooter. Might just as well make it 200. I'll PM you with the address. Thanks!
Recommended Posts