Members JoelR Posted January 25, 2012 Members Report Posted January 25, 2012 Design heading out the door tonight. Handgun is a Beretta PX4 Storm with a Vector Optics Sparkler red laser attached. Didn't like the protruding mounting screw so I decided to add a molded Kydex sleeve to keep the channel from collapsing and keep the screw head off the leather. If I had to do it again, I'd add about 1/2" to the length of the belt slot tail since the boxy configuration does not allow the belt to pull in like in a normal Avenger design. It's still very comfortable to wear even with this shortcoming. As always critiques are welcome. Here you can see the Kydex insert from the top end of the holster. The stitches are placed so they fall into the void between the handgun frame and the laser body so they should not wear. The stitches to right are not really pretty (forgot to hold the Kydex against the holster when drilling - it was late) but serve their purpose. This is the Kydex sleeve as seen from the muzzle end. When holstered, the sleeve just blends in... Quote
cleveland Posted January 25, 2012 Report Posted January 25, 2012 That looks fantastic! How did you attach the Kydex? Quote
Members Shooter McGavin Posted January 25, 2012 Members Report Posted January 25, 2012 Nice work! How many beers did it take to think that up? Quote
Denster Posted January 25, 2012 Report Posted January 25, 2012 Nice solution. I'll bet a six pack at least. Quote
Members JoelR Posted January 25, 2012 Author Members Report Posted January 25, 2012 Thanks everyone. Not sure about the beer but I do recall Mr Evan Williams having some input... The mold for the Kydex was cut from a 2x3 and a table saw. It was wet-formed and then glued into place with Barge and has 4 stitchpoints that keep everything in place. Customer just received it and was thrilled with the fit and finish. In reality, the time well overtook the profit but this was the first order from a business card drop off at a local store so I wanted more to make a big impression than a big profit. Hopefully follow-up orders will make this worthwhile. Quote
wizard of tragacanth Posted January 25, 2012 Report Posted January 25, 2012 Nicely done! I don't mean this as a criticism but I am wondering if this was necessary on an OWB? I can see that it would be a fantastic addition to an IWB, however. Nick Quote
Members JoelR Posted January 25, 2012 Author Members Report Posted January 25, 2012 Nicely done! I don't mean this as a criticism but I am wondering if this was necessary on an OWB? I can see that it would be a fantastic addition to an IWB, however. Nick If it were for a range gun, I would agree that the sleeve is overkill. However, the customer owns a heavy equipment repair shop and wants it to be a daily carry piece so ensuring the channel for the screw cannot be collapsed is critical to ensuring a clean draw at a moments notice. IMHO. Quote
wizard of tragacanth Posted January 25, 2012 Report Posted January 25, 2012 Ahhh, I see, it's made for rough duty. Nick Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.