Members DavidMillsSaddlery Posted February 14, 2012 Members Report Posted February 14, 2012 If the picture loads, you can see where once in a blue mon, at random intervals the bobbin thread comes all the up thru the leather??? I have the bobbin adjusted as tight as it will go, and the top backed way off on both adjustments? the one before the "wax pot" which has been removed, and the hammer type place where this is routed... I am also having trouble with a skipped stitch on occassion! I have the foot pressure adjusted as far as it will go down but still out of the blue it skips? I have a 24 nedle with 277 thread top and bottom! what am I missing??? Quote
Members DavidMillsSaddlery Posted February 15, 2012 Author Members Report Posted February 15, 2012 I went over some things, and found one thing that "might" be the problem! Just need input from others familiar with this machine! Looking at the picture, where my finger is pointed, I found this nut to be loose! This is the "hammer" piece I was refering to which seems to work as a "brake" on the thread as it cycles? HELP!!! Quote
Members busted Posted February 15, 2012 Members Report Posted February 15, 2012 singerco.com/IPinstManuals/97-1_10.pdf This might help a little. On 2/15/2012 at 2:19 PM, turbotexas said: I went over some things, and found one thing that "might" be the problem! Just need input from others familiar with this machine! Looking at the picture, where my finger is pointed, I found this nut to be loose! This is the "hammer" piece I was refering to which seems to work as a "brake" on the thread as it cycles? HELP!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.