LNLeather Posted June 17, 2012 Report Posted June 17, 2012 (edited) This is some Leather Embossing information that was put together by Raymond Tipton of duckcreektraders Raymond & Patty Tipton have been in the saddlery and harness business for some fifty years.... They also have a Website Bunkhouse Tools I thought this information might be of some help to others here. Edited June 17, 2012 by LNLeather Quote
Members Iron Pounder Posted June 18, 2012 Members Report Posted June 18, 2012 Hey that is some good info. Quote
LNLeather Posted October 2, 2012 Author Report Posted October 2, 2012 (edited) I have seen quite a few questions lately that this might answer. Since the new upgrade the writing font is so small it is hard to read, but the pictures answer the questions... Edited October 2, 2012 by LNLeather Quote
Members izolight Posted October 4, 2012 Members Report Posted October 4, 2012 It is mentioned that you can get dies from Texas Custom Dies but where can you get custom Poly Embossing plates? Quote
LNLeather Posted October 4, 2012 Author Report Posted October 4, 2012 (edited) Same place that put together the Leather Embossing information - by Raymond Tipton of (here's a link to----> duckcreektraders Raymond & Patty Tipton have been in the saddlery and harness business for some fifty years.... They also have a Website (here's a link to----> Bunkhouse Tools They have hundreds of designs and styles of emboss plates and emboss rolls available at the ebay auction duckcreektraders They put up different and sometimes new plate and roll designs just about every day. You might find what you want is already made. and - you can also go to their website and look at All of the choices at Bunkhouse Tools I have also asked them to make custom plates for me. Raymond is Easy to deal with and has the Best Customer Service... Just contact them directly and work out the details with them. Raymond Tipton at tiptoncompany@gmail.com You can also see some of the designs I have made on my profile and in my gallery here..... and personally, these folks are just easy and great to deal with... Hope this helps ps: Besides the emboss plates and emboss rolls, they also have available a Manual Hand Crank Leather Embossing Machine for the rolls, Various Holster Emboss Plates of cast resin, and Cartridge Loop Molds, Occasional Molded Holsters, and also various shop equipment or tools - like right now they have up a set of - USED 10 Forged Filigree Punches with Assorted Cut Outs and a - Miniature Saddle Tree 3 1/2" Seat 5 1/2" Edited October 4, 2012 by LNLeather Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.