koreric75 Report post Posted January 28, 2019 11 hours ago, koreric75 said: @Uwe has a great video that I used for this I'll post the link shortly , It's not the exact same machine but I was able to remove the parts to get the thread from underneath and reassemble using this vid, I have an Adler 67-273 Also as mentioned above, with the clutch machine there is a chance with a jam the clutch has popped, it's under the machine on the right side of the shaft, holding the clutch and rotating the hand when toward you should allow the spring loaded ball bearing to pop back into place, let me know if you need pics etc Quote Share this post Link to post Share on other sites
