Members Jeff Dreibus Posted July 9, 2012 Members Report Posted July 9, 2012 (edited) I realize that this is a shot in the dark, but I need to find a local leather supplier in or near Marion or Morganton, NC. I know of Jackson's in Asheville (about 50 miles) and that there are a few places in Hickory, but I would like to find one more local. Forgive me if I don't know all of the trade terms and subtleties which accompany leatherwork. I am a leatherworker only by default because some of the antique carburetors which I restore in the course of my work require small leather components such as seals, air valve stoppers and accelerator pump cups. I buy relatively small pieces of leather, usually no more than 325 sq. in.; such a quantity often lasts me for years. At the moment, I specifically need black leather of fairly smooth grain on one side and close to the .162" thickness I have been using; perhaps that is a nominal 3/16" size in the leather community. Can anyone provide a local lead? Failing that, does anyone have any smallish scraps of such a description which they wish to sell? Jeff Dreibus The Old Carb Doctor Edited July 9, 2012 by Jeff Dreibus Quote
Chief31794 Posted July 9, 2012 Report Posted July 9, 2012 I realize that this is a shot in the dark, but I need to find a local leather supplier in or near Marion or Morganton, NC. I know of Jackson's in Asheville (about 50 miles) and that there are a few places in Hickory, but I would like to find one more local. Forgive me if I don't know all of the trade terms and subtleties which accompany leatherwork. I am a leatherworker only by default because some of the antique carburetors which I restore in the course of my work require small leather components such as seals, air valve stoppers and accelerator pump cups. I buy relatively small pieces of leather, usually no more than 325 sq. in.; such a quantity often lasts me for years. At the moment, I specifically need black leather of fairly smooth grain on one side and close to the .162" thickness I have been using; perhaps that is a nominal 3/16" size in the leather community. Can anyone provide a local lead? Failing that, does anyone have any smallish scraps of such a description which they wish to sell? Jeff Dreibus The Old Carb Doctor Jeff, The leather industry jargon for the leather thickness would be very close to 10 oz leather, that measures out at .15625". That is very thick leather about the size you would use for a very stiff holster. Jeans Belts are normally 8-9 oz and would be .125 - .140". Leather thickness is measured in inches and 1/64" = 1 Oz. That doesn't help in your search but it may help you in ordering leather if you have to go internet or phone. A great place to call would be Springfield Leather Co, they are a sponsor on this site and sell leather by the square foot, split to the exact thickness you want. They are great to deal with and very knowledgeable and will probably work through this for you very easily. Ken Quote "Life's too short to carry ugly leather"
Members Jeff Dreibus Posted July 9, 2012 Author Members Report Posted July 9, 2012 Jeff, The leather industry jargon for the leather thickness would be very close to 10 oz leather, that measures out at .15625". That is very thick leather about the size you would use for a very stiff holster. Jeans Belts are normally 8-9 oz and would be .125 - .140". Leather thickness is measured in inches and 1/64" = 1 Oz. That doesn't help in your search but it may help you in ordering leather if you have to go internet or phone. A great place to call would be Springfield Leather Co, they are a sponsor on this site and sell leather by the square foot, split to the exact thickness you want. They are great to deal with and very knowledgeable and will probably work through this for you very easily. Ken Thanks, Ken; I will check Springfield Leather out. Jeff Quote
Ambassador Luke Hatley Posted July 9, 2012 Ambassador Report Posted July 9, 2012 Have you checked Zack White Leather Co. they are in the Heart of N C. they are also an advertizer on the L W .and great folks. Quote Luke
Members Jeff Dreibus Posted July 9, 2012 Author Members Report Posted July 9, 2012 (edited) Have you checked Zack White Leather Co. they are in the Heart of N C. they are also an advertizer on the L W .and great folks. No I haven't, Luke; I'll be sure to check them out as well. Thanks! Jeff Edited July 9, 2012 by Jeff Dreibus Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.