capnmeow Report post Posted August 1, 2012 (edited) i have a bunch of tools and a bunch i don't need and wanted to sell now the total for the tandy tools i bought is 674.15 with all its sales right now and i have some things you can buy from tandy like coco burnishers and dremel that would bring the total to about 700 ish i was thinking about selling the whole lot for about 500 free shipping and a couple of pieces of leather like a 8 by 11 sheet and a bunch of decent sized scrapes for free to sweeten the deal. Now my question is this a reasonably pricing. Edited August 1, 2012 by capnmeow Quote Share this post Link to post Share on other sites
capnmeow Report post Posted August 1, 2012 (edited) and i would show each piece in its on photo before selling thur ebay i have a bunch of tools and a bunch i don't need and wanted to sell now the total for the tandy tools i bought is 674.15 with all its sales right now and i have some things you can buy from tandy like hand made coco wood burnishers and dremel that would bring the total to about 710 ish i was thinking about selling the whole lot for about 500 free shipping and a couple of pieces of leather like a 8 by 11 sheet and a bunch of decent sized scrapes for free to sweeten the deal. Now my question is this a reasonably pricing. Edited August 1, 2012 by capnmeow Quote Share this post Link to post Share on other sites
Glendon Report post Posted August 1, 2012 Seems like a decent deal on the face of it. If you toss some photos and descriptions down in the Marketplace forum, you might get a bight or two before you have to deal with ebay. Quote Share this post Link to post Share on other sites
Sylvia Report post Posted August 2, 2012 I cringe when I see tool lots that high. Especially if they are Modern Tandy tools. I would much rather see individual prices so people can get what they need and not deal with a plethora of excess tools. But that is just me. Good luck. Quote Share this post Link to post Share on other sites
capnmeow Report post Posted August 2, 2012 Seems like a decent deal on the face of it. If you toss some photos and descriptions down in the Marketplace forum, you might get a bight or two before you have to deal with ebay. thanks most of the tools are hardly used due to my bad planning and not needing them and ill make sure to set up a gallery to show case each tool Quote Share this post Link to post Share on other sites
capnmeow Report post Posted August 2, 2012 I cringe when I see tool lots that high. Especially if they are Modern Tandy tools. I would much rather see individual prices so people can get what they need and not deal with a plethora of excess tools. But that is just me. Good luck. well yes i see your point but the thing is i dont have the time to ship piece by piece and have to do all that updating on what is left and i rather it all go at once. Quote Share this post Link to post Share on other sites
DoubleC Report post Posted August 2, 2012 Cat, I sell on eBay some and I can tell you most people won't bid when something is that high to start with, unless you're going to do a buy it now, and you may or may not get a bid. If you're going to do a regular auction I'd start them lower and let people bid it up that high. Just the way I do my things from watching other stuff that sells. Cheryl Quote Share this post Link to post Share on other sites
capnmeow Report post Posted August 2, 2012 Cat, I sell on eBay some and I can tell you most people won't bid when something is that high to start with, unless you're going to do a buy it now, and you may or may not get a bid. If you're going to do a regular auction I'd start them lower and let people bid it up that high. Just the way I do my things from watching other stuff that sells. Cheryl yeah 500 is the buy it now price ill probably start at 200 with a reserve of 450 Quote Share this post Link to post Share on other sites
DoubleC Report post Posted August 2, 2012 Oh then that should draw a lot of attention. Cheryl Quote Share this post Link to post Share on other sites
