electrathon Posted August 5, 2012 Report Posted August 5, 2012 I have a large number of clicker dies. These are from a printing shop, very similar to how they are made for leather. They work well with leather. If you do not have a clicker press, they work in a shop press with a solid plate above and below them. Put a plate in the press. Next a poly cutting board. Then the leather. Then a die. Then the top plate. Squish in the press and presto- perfectly cut shapes. I have a lot of these in many random sizes. It will be overwealming if I try to list each one separate. Here is the deal. You paypal me $25 and I will send you 10 random sizes, small to large. If you want to be picky then the price will go up (this is $2.50 each!). State round or rectangular. Aaron
electrathon Posted August 10, 2012 Author Report Posted August 10, 2012 I have sold 50 of these and still have a huge amount left.
stelmackr Posted August 12, 2012 Report Posted August 12, 2012 I have sold 50 of these and still have a huge amount left. I have bought several of these dies. They work like a clicker die. I used them with my book press on leather--up to approximately 5 oz. Very happy with quick delivery and how well they work with leather. I guess they were used for cutting paper forms and even got one shaped like a "Rolodex" card, so now I can imprint leather with my letterpress lead type and make a leather contact list. Bob Stelmack Bob Stelmack Desert Leathercraft LLC Former Editor of the, RawHide Gazette, for the Puget Sound Leather Artisans Co-Op, 25 years of doing it was enough...
cleveland Posted December 7, 2012 Report Posted December 7, 2012 Any that are the size of a coaster for the coffee table? If so, I'll take a batch of them.
electrathon Posted December 7, 2012 Author Report Posted December 7, 2012 I will look tomorrow at hat sizes are left. I clicked this one with one of the dies.
cleveland Posted December 7, 2012 Report Posted December 7, 2012 I am looking to make some coasters for our coffee table and came across your post. I figured it's worth a shot. :-)
Members gunter Posted December 11, 2012 Members Report Posted December 11, 2012 am looking for clicker dies....but other shapes then these..... Once I moved about like the wind, but now I surrender.(Geronimo) Failure is always an option
Members KandB Posted January 7, 2013 Members Report Posted January 7, 2013 Do you have any more left? Definitely interested. ---------------------------------- Divina Denuevo www.divina-denuevo.com
electrathon Posted January 7, 2013 Author Report Posted January 7, 2013 I have a few more left. Most are smaller circles and rectandles and index cards. I will try to get a picture of the box of them.
Recommended Posts