Jump to content

Recommended Posts

  • Members
Posted

Didn't know where else to post this, but I saw someone advertising rattlesnake skins (on ebay) that were "acid pickled" and then tanned. If anyone is familiar with this, I was wondering if these skins are suitable for inlays and such. Thanks for the help!

"The fear of the LORD leads to life, and he who has it will abide in satisfaction; He will not be visited with evil." - Proverbs 19:23

  • Members
Posted

I used oxalic acid to tan a skunk, and a couple of squirrel hides. There are lots of different acids used in tanning, you may need to find out which method was used. Off hand I would say they would be alright for inlays, etc..

You laugh at me because I am different. I laugh at you because you are all the same.

  • Members
Posted

ok, will definitely check. Thanks for the info! Is there any method of tanning, acid or otherwise, that would be deemed unsuitable for inlaying, or that might cause the skin to not last as long?

"The fear of the LORD leads to life, and he who has it will abide in satisfaction; He will not be visited with evil." - Proverbs 19:23

  • Members
Posted

I can't say anything about lasting as all tanning is done to preserve leather.

You laugh at me because I am different. I laugh at you because you are all the same.

Posted

You would probably not want some acid tans against your sweating skin as they will burn the skin and cause a rash.

  • Contributing Member
Posted

And be sure that what you're getting is actually tanned, and not just "preserved". I can "preserve" a skin with sun, salt, and a jug of antifreeze (ethylene glycol), but it wouldn't be good for much. See if you can get the specifics of what the seller is doing.

Mike DeLoach

Esse Quam Videri (Be rather than Seem)

"Don't learn the tricks of the trade.....Learn the trade."

"Teach what you know......Learn what you don't."

LEATHER ARTISAN'S DIGITAL GUILD on Facebook.

  • Members
Posted

Thanks everyone...there's just no substitute for experience! I appreciate your time and help.

"The fear of the LORD leads to life, and he who has it will abide in satisfaction; He will not be visited with evil." - Proverbs 19:23

Guest
This topic is now closed to further replies.
×
×
  • Create New...