Singer 112 Width Adjusting

[Happy Hooligan]

I'm getting my new 112 SV110 singer double needle going and it came with a wide double needle set up and I replaced it with a 1/4 dogs and needle holder.

Now the hooks don't pick up the threads on the now closer needles.

I noticed on the bottom of the machine there are two screws that the bobbins can move on and a gear that that two screws and looks like you unscrew it, slide it a bit towards the needle and then slide the bobbin holder till the hook hits the thread.

Sound about right? Or is there an easier way?

Thanks

[CowboyBob]

I'm getting my new 112 SV110 singer double needle going and it came with a wide double needle set up and I replaced it with a 1/4 dogs and needle holder.

Now the hooks don't pick up the threads on the now closer needles.

I noticed on the bottom of the machine there are two screws that the bobbins can move on and a gear that that two screws and looks like you unscrew it, slide it a bit towards the needle and then slide the bobbin holder till the hook hits the thread.

Sound about right? Or is there an easier way?

Thanks

Yes,you have to move the gears (big one) & hooks in adj the hooks so they are real close w/o hitting the needle.