Jaymack Posted August 31, 2012 Report Posted August 31, 2012 I've used the search engine, but I can't find a post about sharpening a diamond shaped awl blade. Any help on this topic would be appreciated. Thanks, John Quote
KAYAK45 Posted August 31, 2012 Report Posted August 31, 2012 There is a video on youtube, just search "sharpening an awl" I didn't think much of it, but it's awl I've seen. It'l get you started. It is to the point. (Sorry for the bad puns.) Kevin Quote
Jaymack Posted August 31, 2012 Author Report Posted August 31, 2012 Kevin, Thanks for the quick response and I liked your pun! John Quote
dirtclod Posted August 31, 2012 Report Posted August 31, 2012 I start out on a stone then may go wet dry sand paper and finish by buffing. Buffing wheel with green compund on a grinder works fine if you don't have a buffer. Quote
Members Charliewz Posted August 31, 2012 Members Report Posted August 31, 2012 I've used the search engine, but I can't find a post about sharpening a diamond shaped awl blade. Any help on this topic would be appreciated. Thanks, John I found this on the web a while back. http://www.bowstock.co.uk/saa.html Charlie Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.