Members Cole Posted November 7, 2012 Members Report Posted November 7, 2012 what is the process for making a simple cuff bracelet? is line 20 snaps good eno ugh for 7-9 oz. leather? Quote
Moderator immiketoo Posted November 7, 2012 Moderator Report Posted November 7, 2012 Yes or use a sam browne stud. or a small buckle. Quote
Contributing Member TwinOaks Posted November 7, 2012 Contributing Member Report Posted November 7, 2012 ...or a tab and slot. Quote
Members Cole Posted November 7, 2012 Author Members Report Posted November 7, 2012 i like the sam browne stud. what is a tab and slot? Quote
Contributing Member TwinOaks Posted November 7, 2012 Contributing Member Report Posted November 7, 2012 You shape one end like an arrow, and on the other end you make a slit that's about 2/3 the width of the arrow. To fasten, fold/wiggle/shove the dart through the slot and it will hold. Think of the way a donut box closes. The advantages of this method is that there's no additional hardware, and it lays flat. Wrap the slot end first, then bring the tab around and over...then push the tab down through the slot. Both 'ends' will be under the bracelet. Disadvantage is that it needs a little more leather (1.5-2 inches) and that it has very little fashion appeal....unless you like the rugged look. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.