Members cmantz Posted January 7, 2013 Members Report Posted January 7, 2013 Thought I give it a go making bronc halters. I have been in the embroidery business for 12+ years and since my daughter is an avid rider and I saw similar ones online, I figured I'd try an embroidered one. First one: And this was the second: (need to get better at taking the pictures for sure) I also tried my luck at laser engraving one. In this one, I used an all-in-one satin and then went over with Feibings Hi-Liter and it didn't have the effect I was looking for....and caused the darkening to the right of the logo area. I have ALOT to learn as far as satin and finishing leather...it's a little overwhelming to say the least. Quote
Members Oak Grove Leather Works Posted February 5, 2013 Members Report Posted February 5, 2013 Those look great! I do tooling, but have never worked on halters. How do your pieces get attached to the halter? Quote
Members cmantz Posted February 27, 2013 Author Members Report Posted February 27, 2013 I just saw that you asked a question...and I never answered. I am sorry. It was not intentional. There are tabs on the nosebands that I either fold back or forward and I attach them to the halters with the conchos. This way customers can change them out if need be or they can just buy the noseband and put them on their own halter. I have seen them with tabs that are folded to the front and sewn to the noseband. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.