Members Csr111 Posted January 14, 2013 Members Report Posted January 14, 2013 (edited) HI - I'm looking for advice on finishing my wallets with the edging/lining like that of the wallet in the attached pictures. I have the leather i want and have it thinned to a workable gauge, but am having problems with how to sew/cut to form neatly around the edges. Any help with technique or steps would be greatly appreciated! Thanks! Edited January 14, 2013 by Csr111 Quote
Members Justis Cases Posted January 14, 2013 Members Report Posted January 14, 2013 HI - I'm looking for advice on finishing my wallets with the edging/lining like that of the wallet in the attached pictures. I have the leather i want and have it thinned to a workable gauge, but am having problems with how to sew/cut to form neatly around the edges. Any help with technique or steps would be greatly appreciated! Thanks! Contact cement the edges to hold everything in place and then machine stitch. Quote
Members Cyberthrasher Posted January 14, 2013 Members Report Posted January 14, 2013 About halfway down the post here, Kevin shows how he does a wallet binding. Starts right where he says "30 inch piece of lambskin". This tutorial is also stickied down in the wallet section, so if you ever lose it you can find it again pretty quick. http://leatherworker.net/forum/index.php?showtopic=9940 Quote
Members joesu88 Posted April 9, 2015 Members Report Posted April 9, 2015 Hi, Is there any stitching done on the card compartments? If there is no stitching, can you let me know what lining did you use for the card compartment and how you do it? Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.