hamradio Report post Posted February 12, 2013 Hello! I hate to make my first post a question, but, Is anyone aware of a supplier of brass or nickel-plated conway buckles in relatively small sizes? I recently bought twenty of these, in hopes they would work on a project: http://store.ryanspr...m/1cobubr1.html Upon receiving them, I realized they are way too big. 7oz leather doubled over in it looks kind of ridiculous, and the hole the center post requires is around 11/64". Far heavier duty and larger than my little thing requires. I had been previously using cheap center bar buckles identical to this: This buckle allowed me to use a 5/64" hole, which I preferred over the large hole. The down side to this buckle was that it would sometimes snag clothing in my application and open up slightly. The conway buckle seemed to be the answer to my problem, until I discovered that finding small sizes is difficult. The strap end I'm using with these buckles is a hair shy of 1/2" wide. The cheap brass 1/2" conway buckle I dealt with ended up being more in the neighborhood of .53" wide. My center bar buckles were a little closer to .5". It appears that all of the 1/2" conway buckles I'm finding around the 'net are exactly the same as the ones I'm currently dealing with...very thick, beefy, and a large center post. I'm hunting for something with a smaller center post that isn't as beefy. Anything out there? Thanks! -Devan Quote Share this post Link to post Share on other sites
Tree Reaper Report post Posted February 14, 2013 (edited) Springfield has 1/2" conways. It might be worth a call to ask if they can order anything smaller. Edited February 14, 2013 by Tree Reaper Quote Share this post Link to post Share on other sites
Torquewrench Report post Posted February 15, 2013 Try buckleguy.com. They had a few items I couldn't find anywhere else. Just got my first order. Very happy with products and service. Quote Share this post Link to post Share on other sites
raysouth Report post Posted February 22, 2013 Ohio Travel Bag may have what you need. Good Luck. Ray Quote Share this post Link to post Share on other sites