Jump to content

Recommended Posts

I was wanting to try the vinegroon, but the only vinegar I can find is diluted to 5 % with water. Is this the right stuff?

Share this post


Link to post
Share on other sites

Yes its fine, Normal vinegar ig 3-7% depending on whose you buy. I use 5% and its fine. Get a glass jar, some 0000 steel wool and a lid. Put the wool in the jar and fill the jar with vinegar. lightly close the lid. Once a day tighten the lid and shake the bottle. Then loosen the lid and wait at least 2 weeks for all the steel wool to go away. Filter and use. After 3 days you can test it and it will make it black but you need to wait the 2 weeks. I let it eat all the wool then add more. I keep adding more until it wont dissolve anymore. But some people just use a pad or two and let it go at that.

good luck.

Share this post


Link to post
Share on other sites

thanks...we'll do..

Share this post


Link to post
Share on other sites

Another step is to spray some lighter fluid on the steel wool and set on fire. Steel wool usually has some type of coating on it to prevent it from rusting. This will speed the vingaroon making process up.

Share this post


Link to post
Share on other sites

All the research I've done says that the vinegar will remove any oil or other coating that prevents rust. This information comes from several websites selling chemistry equipment to schools and labs for educational experiments.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...