Tree Reaper Posted April 26, 2013 Report Posted April 26, 2013 Any wood working shops in your area or a high school with a shop class? You could probably make several with a hole saw , drill out the hole to the larger arbor size then put them on the shaft. Make the grooves with a small wood rasp as the machine turns. Quote
Members shtoink Posted April 27, 2013 Members Report Posted April 27, 2013 Apparently I'm not explaining things right. Boy, was I off by a wide margin. My apologies. I had something far different in mind. I agree that making your own would be quite a bit cheaper. The bonus is that it'll have customizations that you want. I'm thinking that a decent motor, some pulleys and, a pair of pillow blocks, and an arbor, and you'll be in business. I also think that it'd even possible to build your burnisher and use it to turn your wood chunk right on it. I still a speed controller would be a good feature, but that's just me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.