Jump to content
Sign in to follow this  
jynelle

Gluing Appliques, Without A Messy Glue "outline"

Recommended Posts

Hi folks,

Perhaps you can share how you might go about adhering (leather) appliques to the side of a leather bag. I am following the glue process with stitching the pieces together--but find that without glue, the pointed tips of my applique are curling up. So my goal is to adhere the utmost "tips" of these appliques so they don't pull up with wear.

What I'm currently doing (that's not working!) :

Currently, I'm running a scribe around the applique, then carefully applying contact cement (with a small paintbrush) to the bag--keeping inside the stencil lines but going right up them. I then apply contact cement to the applique, wait until everything is tacky, and press together.

The tips of the applique are adhering well, but there's a small messy glue seepage around many of the edges. No luck removing it with either contact cement thinner or a rubber eraser.

***Are there spray-on contact cements that might work--just spraying onto the applique?? ...Or any other thoughts??

Thanks!

Jynelle

Share this post


Link to post
Share on other sites

Let the contact cement fully dry before putting together..... this will prevent any seepage.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...