CodaWolf Report post Posted July 17, 2013 After a quick search I couldn't find the information I needed. Do you guys know if the XD40 subcompact blue gun will work for molding an XD9 subcompact? Thanks! Quote Share this post Link to post Share on other sites
PappyUSA Report post Posted July 17, 2013 Yes a 3" XD 40 is the same size as the 3" XD 9 and eaither casting will do for both guns. The new XDS is a much smaller gun and needs it's own casting. Quote Share this post Link to post Share on other sites
CodaWolf Report post Posted July 17, 2013 Thank you very much! Quote Share this post Link to post Share on other sites
chiefjason Report post Posted July 18, 2013 The new XDS is a much smaller gun and needs it's own casting. Yes, but...... The new 9mm version is on the same frame as the .45. So the XDs .45 will work for both there too. Matter of fact, the double stack XD line is nearly identical in frame width for 9mm, .40, and .45; much like the M&P series. Quote Share this post Link to post Share on other sites
