Neel's Saddlery 441 Machine, Good For Professional Work?

[BDAZ]

Check out the Cowboy 3200: http://www.tolindsewmach.com/cb3200.html

I received mine a few weeks ago and i am thrileld with it. It costs LESS than the used machine you are looking at and uses all the accessories of the 4500. It comes WITH the servo motor, and I ordered it with the stand from the 4500.

Cya!

Bob

[Rayban]

Check out the Cowboy 3200: http://www.tolindsew...com/cb3200.html

I received mine a few weeks ago and i am thrileld with it. It costs LESS than the used machine you are looking at and uses all the accessories of the 4500. It comes WITH the servo motor, and I ordered it with the stand from the 4500.

Cya!

Bob

Pretty nice machine...but only rated at 1/2" thickness, his is 3/4".

[BDAZ]

Actually the 3500 is 7/8th not 3/4 which is substantial!

Thanks!

Bob

[Rayban]

Actually the 3500 is 7/8th not 3/4 which is substantial!

Thanks!

Bob

I have the 3500...while the foot will lift 7/8" I wouldn't try stitching as much...just a little too much.

[Wizcrafts]

Actually the 3500 is 7/8th not 3/4 which is substantial!

Thanks!

Bob

True, for the CB3500, 4500 and 5500. But, not true for the new CB3200. It "clears" up to 5/8 inch but only sews up to 1/2 inch. The walking feet need vertical space to alternate up and down.