Members Shed Tinkerer Posted October 13, 2013 Members Report Posted October 13, 2013 ***Warning: Total newbie - could ask emberrassingly stupid questions*** I'm restoring a 1978 Ford F250 and want to have a go at doing some of the upholstery myself. So I need a walking foot machine that can handle reasonably thick thread. The thing is I've been keeping an eye on ebay and gumtree (australian version of Craigs list I think) and saw this add: http://www.gumtree.com.au/s-ad/upwey/other-home-garden/industrial-walking-foot-leather-sewing-machine-/1029538705 And was wondering if the experts here would mind sharing a comment or two on this. I can't quite work out the model number to do some proper research on machine specs. I have noticed that it doesn't have the usual foot....but a wheel looking thing? Is this normal or something that should be replaced? Thanks for helping me with this steep learning curve people! Jerome Quote Trying to get the hang of my Singer 31K47....
Members tnawrot2 Posted October 13, 2013 Members Report Posted October 13, 2013 It is not a walking foot machine. A walking foot machine would have three shafts, it is easier to view from the side. One shaft for the needle, another shaft for the outside foot and the last shaft for the inside foot. The machine you attached a picture is a straight stitch machine, the either have a foot or roller, the roller makes it easier to make sharp curved lines. The Singer 31-15 is a common commercial straight stitch machine. Quote
Members Shed Tinkerer Posted October 13, 2013 Author Members Report Posted October 13, 2013 Thanks for that tnawrot2...I didn't think it looked right...won't bother checking the machine out then. :-) Quote Trying to get the hang of my Singer 31K47....
Members RoyalLeatherDesigns Posted October 13, 2013 Members Report Posted October 13, 2013 Look for a Consew 206rb5, or a pfaff 145, Pfaff 545' Pfaff 1245, or something similar to these machines you can find them relatively cheap on Craigslist. Good Luck! Ralph Quote
Members Constabulary Posted October 13, 2013 Members Report Posted October 13, 2013 seems to be a Pfaff 141 - also a good machine. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.