Members Studio-N Posted December 3, 2013 Members Report Posted December 3, 2013 Thanks for looking. I'm doing my end of the year shop clearing. What I've got here is a lot of 16 early delrin stamps that I made. These were non-production stamps or either prototypes or one-time-use project stamps. These are made from delrin and the backs are cut so you can use the tandy hefty handle as shown in the last picture. only one does not have the back cut that way but in all cases you can use an arbor press if you prefer. The size on these is usually 1.25" high. So prototypes are not cut as deep as the others, but you can see the impressions were still good in the examples provided. I usually get $16 on custom stamps, but this entire lot is going for: $48 plus shipping. That's $3/stamp. Payment by paypal. email me at nicksilva@yahoo.com. Thanks and happy holidays.
Members steadybrook Posted December 6, 2013 Members Report Posted December 6, 2013 What is the diameter of the stamps?
Members Studio-N Posted December 6, 2013 Author Members Report Posted December 6, 2013 (edited) They are 1.25" on a 1.5" disk. Here is my FAQ page. Edited December 6, 2013 by Studio-N
Members steadybrook Posted December 6, 2013 Members Report Posted December 6, 2013 Thanks, Can you ship them to Canada? Nova Scotia B0N1Z0
Members Studio-N Posted December 6, 2013 Author Members Report Posted December 6, 2013 yes. PM sent on international postage.
Members Studio-N Posted December 6, 2013 Author Members Report Posted December 6, 2013 Stamps are sold. Thanks to all that looked.
Recommended Posts