Jump to content

Recommended Posts

  • Members
Posted

I am looking to get another machine and the above 2 are available in my budget range. They are both walking foot machines but no reverse. I will slow them down with smaller pullies. One has a large bobbin but other than that, seem similar. Any thoughts on one over the other? Thanks.

  • Members
Posted

The Juki LU-563 should have reverse, plus the way larger *U* bobbin. The 225 is ....without reverse. I'd go with the 563 myself.

-DC

Machines: Juki LU-563, Consew 206-RB5, Singer 20U33, Pfaff 481, Mitsubishi CU-865-22, Consew 29B, Rebadged Juki LU-562,  Mitsubishi LS2-180,  Seiko SK-6, Juki LG-158-1

Posted

I agree with DC. Steve

Thank You

Steve Tayrien

Leather Machine Co., Inc.

2141 E. Philadelphia St. Unit "U"

Ontario, California 91761

1-866-962-9880

http://www.leathermachineco.com

cobra@leathermachineco.com

cobra.gif

 

  • Moderator
Posted

LU-563, as long as it is tight (but not binding) and sews a proper stitch. Also, make sure that the stitch length lever doesn't raise up when you speed up, shortening the stitches. That is caused by weak springs in the reverse mechanism.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

Thanks for the input.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...