Members jkbuzbee Posted January 11, 2014 Author Members Report Posted January 11, 2014 Joey you lost me on this one lol I know the reducer I have works well but now that I change my needle and thread to a 22/138 now I'm having trouble with my bobbin thread I can't get it to pull up thru the bottom I might have my needle in wrong I'll play around with it some more tonight Quote
Members joeyrsmith Posted January 11, 2014 Members Report Posted January 11, 2014 jkbuzbee, I am going on pcox's reply with the larger handwheel earlier in your thread. I have figured out how to do yours. Hardware store here in the Fl Keys has the parts. Dont have many stores down here. Quote
Members pcox Posted January 12, 2014 Members Report Posted January 12, 2014 Hope these pics help. I pulled the pulley/hub off the shaft and turned the pulley hub down to 1 inch in my lathe then filed a flat for the set screw on the 6 inch pulley. slipped it all back together, fitted a longer belt. Instant happy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.