Members jkbuzbee Posted January 10, 2014 Members Report Posted January 10, 2014 seems I'm having trouble keeping my blade sharp I make two cuts and It starts pulling and cutting bad I stropp it and its good for two or three more cuts then I'm back to stropping it.. am I doing something wrong? thanks J&K Quote
JRLeather2 Posted January 10, 2014 Report Posted January 10, 2014 i think that somewhat depends on the type of blade you use...ruby,ceramic, steel.... and is your leather cased properly when you are cutting??? Quote
electrathon Posted January 11, 2014 Report Posted January 11, 2014 The better the quality of the steel the longer a blade will stay sharp. If your blade is initially sharpened properly, the likely problem is that the cutting edge is folding over and you are resetting the burr upright when you are stropping. A better quality blade will fix the problem. Quote
Members jkbuzbee Posted January 11, 2014 Author Members Report Posted January 11, 2014 1/8 steel flat not angled Tandy swivel knife! Caseing I fill a small bowl of water with a drop of dawn soap dip it in for just a min take it out let it dry just a bit bag it for 8-10 hrs. Then take it out let it dry out for about 10-15 min till it starts turning lighter then trace then cut it then bevel What would be a good blade for me to get? Thanks for y'all's help! J&k Quote
electrathon Posted January 11, 2014 Report Posted January 11, 2014 A decent blade at a good price is a Barry King blade. Tell him you are using a Tandy knife to make sure it fits it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.