Members Countryboy976 Posted January 15, 2014 Author Members Report Posted January 15, 2014 I have an over stitch wheel now yes. At the time I made that holster I was using an awl and just stabbing "best guess" the distance between holes. I got impatient and wanted to see it done. Lol Quote
electrathon Posted January 15, 2014 Report Posted January 15, 2014 The two things I see. On your hand stitching you are rotating which thread is on the top of the stich and it is making your stitches inconsistent. Always put the same thread to the same side with each stitch. Second, on your long curved cut lines. Try to find an edge guide and pull your knife along the guide. Your lines will "wander" less that way. Aaron Quote
Members Countryboy976 Posted January 16, 2014 Author Members Report Posted January 16, 2014 Awesome input, thanks elec Quote
Members r lenna Posted January 17, 2014 Members Report Posted January 17, 2014 About the oil, I have had second thoughts. Oil would keep a water based dye from working at all. I gave you some bad advice on that one. Sorry about that. Rob Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.