Members klickitat Posted March 14, 2014 Members Report Posted March 14, 2014 (edited) I am new to serious leather working and recently bought a pull type skiver. After 2 hours of playing with it and adjusting it (a little filing) I got it to work beautifully. I can taper 8 oz down to nothing and make it flat and pretty.The problem is that I picked up some 8 oz chrome tanned leather that is soft and I am having a hard time skiving it. I can get about half way through and then I can not get it to cut any longer. Is there a trick to skiving chrome tanned leather? Edited March 14, 2014 by klickitat Quote
Members oltoot Posted March 14, 2014 Members Report Posted March 14, 2014 chrome tan simply wont skive pretty like veg tan will. I have had some success by putting duct tape on the back of the piece and then pulling it through or taking my round knife to it but if it is tanned too soft, it will still not do well. Quote
Members TomG Posted March 14, 2014 Members Report Posted March 14, 2014 Try a belt sander and angle the leather for the taper you want. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.