rcsaddles Posted May 5, 2014 Report Posted May 5, 2014 I have a couple sets of kangaroo reins and romel to repair and need a little advise. The part that attaches the bit to the reins, not sure what the technical name is, needs replaced. I have to make four of these. Not sure what the goig rate is for something like this. Any help in pricing would be appreciated. Quote Joe Boyles Rugged Cross Saddlery Lewistown, Montana Romans 6:23
Members bucksnort Posted May 5, 2014 Members Report Posted May 5, 2014 Joe, I work kind of cheap, but I think cost of material & about an hour of work per would put them at about $30 a piece on the low end. I'm not sure, but "the part that attaches the bit to the reins" may possibly be the technical term. Just kidding, Buck Quote
rcsaddles Posted May 5, 2014 Author Report Posted May 5, 2014 Thanks Buck. I'll go from there. I'm also a little "cheap" on the pricing. Quote Joe Boyles Rugged Cross Saddlery Lewistown, Montana Romans 6:23
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.