DavidL Report post Posted June 15, 2014 I had a piece I finish come apart at the backstitch. The thread is not poly so it can't be burned. How can I finish the stitch the next time so it won't come apart. Quote Share this post Link to post Share on other sites
Troy I Report post Posted June 15, 2014 Before you trim the thread. ..pull it tight and make sure that the knot is buried in the leather, then trim the thread as close as you can---but be careful you don't cut any other thread except the excess tails. Hope this helps Quote Share this post Link to post Share on other sites
Macca Report post Posted June 15, 2014 drop of glue on an awl & stick it into the stitch Quote Share this post Link to post Share on other sites
DavidL Report post Posted June 15, 2014 thanks. Quote Share this post Link to post Share on other sites
electrathon Report post Posted June 15, 2014 Use smaller/tighter holes. Quote Share this post Link to post Share on other sites
biglew Report post Posted June 19, 2014 drop of glue on an awl & stick it into the stitch what glue do you recommend Quote Share this post Link to post Share on other sites
