Members DavidL Posted June 15, 2014 Members Report Posted June 15, 2014 I had a piece I finish come apart at the backstitch. The thread is not poly so it can't be burned. How can I finish the stitch the next time so it won't come apart. Quote
Troy I Posted June 15, 2014 Report Posted June 15, 2014 Before you trim the thread. ..pull it tight and make sure that the knot is buried in the leather, then trim the thread as close as you can---but be careful you don't cut any other thread except the excess tails. Hope this helps Quote
Members Macca Posted June 15, 2014 Members Report Posted June 15, 2014 drop of glue on an awl & stick it into the stitch Quote
Members biglew Posted June 19, 2014 Members Report Posted June 19, 2014 drop of glue on an awl & stick it into the stitch what glue do you recommend Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.