Members Joeyd7 Posted July 25, 2014 Members Report Posted July 25, 2014 Hi, Is there any benefit to turning the top 3 hole thread guide horizontal compared to vertically? I see many people turn them horizontal and was curious if there was any difference? Thanks. Quote
Members Constabulary Posted July 25, 2014 Members Report Posted July 25, 2014 Sometimes - it depends on the angle that the thread runs into your thread tension discs. Having a flat angle can prevent the thread from popping out of the discs sometimes. I had this with a friends Singer 211. A flatter angle solved it. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.