Members Colt W Knight Posted September 25, 2014 Members Report Posted September 25, 2014 I have never owned a Ranger belt, but have wanted one after I saw one for the first time ( and new what I was looking at). Decided to make one, but I couldn't find any guidelines about the over laps. I just winged it after looking at a few picture. Couple questions for yall. 1. How long do you make your overlap on the wide part that tucks in behind the belt? 2. Where do you position your buckle in relation to the end of the wide part of the belt? Quote
Members Colt W Knight Posted September 25, 2014 Author Members Report Posted September 25, 2014 (edited) My over lap is about 2" longer than the 1" strap with the holes punched in it. The inside opening of my buckle sits flush with the wide end on the other side of the strap * still need to finish burnish the edges and add a few copper rivets. Belt is 13 ounce latigo I had left over from GPS tracking collars I made for cattle. The 1" straps are 8 ounce veg tan. Edited September 25, 2014 by Colt W Knight Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.