Jarakoko Report post Posted October 31, 2014 I got Juki 1541S couple days a go, it worked fine till yesterday. machine got stuck, as its the feature of the safety clutch but even after unlocking it, it keeps jamming. I called the place I bought the machine from and was advised to take the bobbin casing all out as there might be thread stuck. I had very hard time putting the bobbin back together as it looked the machine is out of time. After getting it all back together it worked for like 10min and it keeps blocking it self and some broken needles happened. I'm having someone to come look at it next week, but I'm supper bummed out about it. What am I doing wrong? is it something this machine is know for? Quote Share this post Link to post Share on other sites
Jarakoko Report post Posted November 2, 2014 No one? I'm having someone to look at it on Monday. Keep braking tips of my needles. Quote Share this post Link to post Share on other sites
Constabulary Report post Posted November 2, 2014 I´d had crank it with needle plate removed and check what is going on with the needle and hook. When the needle is braking it probably hits a part of the hook or the hooks it to close to the needle and is touching / braking it. Tomorrow is Monday so I´d wait for the mechanic as you already ordered him to come. Quote Share this post Link to post Share on other sites
Tejas Report post Posted November 2, 2014 Attached is a service manual for the Juki 1541. Using find for "breakage," needle breakage was found a few times. JUKI_DNU-1541_SERVICE_MANUAL.pdf Quote Share this post Link to post Share on other sites
Tejas Report post Posted November 2, 2014 Attached is a sewing trouble shooting chart that lists 24 causes and solutions for needle breakage. sewing_troubleshooting_chart.pdf Quote Share this post Link to post Share on other sites
