Members Jarakoko Posted October 31, 2014 Members Report Posted October 31, 2014 I got Juki 1541S couple days a go, it worked fine till yesterday. machine got stuck, as its the feature of the safety clutch but even after unlocking it, it keeps jamming. I called the place I bought the machine from and was advised to take the bobbin casing all out as there might be thread stuck. I had very hard time putting the bobbin back together as it looked the machine is out of time. After getting it all back together it worked for like 10min and it keeps blocking it self and some broken needles happened. I'm having someone to come look at it next week, but I'm supper bummed out about it. What am I doing wrong? is it something this machine is know for? Quote
Members Jarakoko Posted November 2, 2014 Author Members Report Posted November 2, 2014 No one? I'm having someone to look at it on Monday. Keep braking tips of my needles. Quote
Members Constabulary Posted November 2, 2014 Members Report Posted November 2, 2014 I´d had crank it with needle plate removed and check what is going on with the needle and hook. When the needle is braking it probably hits a part of the hook or the hooks it to close to the needle and is touching / braking it. Tomorrow is Monday so I´d wait for the mechanic as you already ordered him to come. Quote
Members Tejas Posted November 2, 2014 Members Report Posted November 2, 2014 Attached is a service manual for the Juki 1541. Using find for "breakage," needle breakage was found a few times. JUKI_DNU-1541_SERVICE_MANUAL.pdf Quote
Members Tejas Posted November 2, 2014 Members Report Posted November 2, 2014 Attached is a sewing trouble shooting chart that lists 24 causes and solutions for needle breakage. sewing_troubleshooting_chart.pdf Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.