Members Rocknrodeotack Posted November 23, 2014 Members Report Posted November 23, 2014 (edited) I am attempting to create a braided air horn tug or pull, whichever you may wish to call it. It seems the tug consists of a 4 part round braid. The finished product should have the diameter of a quarter. I decided to go with 4 oz latigo leather 1/2" straps, based on some pictures, no cord. I've been watching video after video on YouTube but cannot seem to master the braid effectively. Is there a better tutorial of doing it? Or am I using the wrong leather? Edited November 23, 2014 by Rocknrodeotack Quote
Members Rawhidelady Posted November 24, 2014 Members Report Posted November 24, 2014 I would assume with 1/2" wide throngs that you would need a core for the braid to look good. Latigo leather should be fine, not sure about the weight (4oz). Can you post a photo showing how your braid is ending up? I may be able to tell more from the photo. I will try to see if I have some latigo of that weight and make the throngs from it and see how it turns out for me. I'll post the results tomorrow. and if you can post a photo of the tug that you are attempting to recreate it would help too. and if you can post a photo of the tug that you are attempting to recreate it would help too. Quote
Members Rocknrodeotack Posted November 24, 2014 Author Members Report Posted November 24, 2014 (edited) Thank you for the response, however, I do not have a picture of my attempted work as it's not braiding nicely. Here is a picture of the pull. Edited November 24, 2014 by Rocknrodeotack Quote
Contributing Member TwinOaks Posted November 24, 2014 Contributing Member Report Posted November 24, 2014 There is a ratio that you need to follow, (Braiders, chime in here if this needs correcting). Basic instruction: Take the circumference of the size braid you want (or of the core if you have one), and divide by the number of strands you want to use, and that gives you the width of the strands. In this case, 1" x Pi (3.14) --> 3.14 / 4(strands)---> .785"....or 3/4 inch. 1/2" would work, but would not have the same diameter without some gaps.Another thing to consider (since we cant' see what your strands are doing) is that you may need to taper the edges of the strands so that they lay down neatly. You can purchase or build one of several variants fairly inexpensively. Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
Members KnotHead Posted November 24, 2014 Members Report Posted November 24, 2014 For the size of a quater you'll need 4 strands cut at, 1.072125 inches. So, I'd round it down to about an 1 inch in width. Brian... Quote Best Regards, Brian Kidd
Contributing Member TwinOaks Posted November 25, 2014 Contributing Member Report Posted November 25, 2014 ?!? where'd I go wrong in the calculation? Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
Members KnotHead Posted November 25, 2014 Members Report Posted November 25, 2014 Diameter * 4.5 Take that and divide by the number of strands you want to use. Brian... Quote Best Regards, Brian Kidd
Members bergjes Posted November 25, 2014 Members Report Posted November 25, 2014 There is a ratio that you need to follow, (Braiders, chime in here if this needs correcting). Basic instruction: Take the circumference of the size braid you want (or of the core if you have one), and divide by the number of strands you want to use, and that gives you the width of the strands. In this case, 1" x Pi (3.14) --> 3.14 / 4(strands)---> .785"....or 3/4 inch. 1/2" would work, but would not have the same diameter without some gaps. Another thing to consider (since we cant' see what your strands are doing) is that you may need to taper the edges of the strands so that they lay down neatly. You can purchase or build one of several variants fairly inexpensively. If I'm not mistaken, the circumference of a circle = 2 * Pi(3,14) * r ??? Quote
Members Rocknrodeotack Posted November 25, 2014 Author Members Report Posted November 25, 2014 Thanks for the tip, but I can't seem to physically braid the braid correctly. Is there a tutorial or diagram that is accurate for leather? Quote
Members KnotHead Posted November 25, 2014 Members Report Posted November 25, 2014 Well then. I think that the one I got this from is a whip braider and has been using it for about 30yrs. He don't seem to have an issue with it. If I'm not mistaken, the circumference of a circle = 2 * Pi(3,14) * r ??? Quote Best Regards, Brian Kidd
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.