terrypen Report post Posted January 22, 2015 This may sound like a silly question, but I am having trouble with my piece turning as I am tooling. Especially when I am using a beveler stamp like the B702 or b202 etc.. The piece is small like a scrap, fob, or coaster size. Am I missing something? haha Terry Quote Share this post Link to post Share on other sites
howie696 Report post Posted January 22, 2015 stick it onto some contact that is bigger than the piece it gives you something to hold on to Quote Share this post Link to post Share on other sites
CrazedLemming Report post Posted January 22, 2015 I have a weight I set on things while I'm working. It's a 1in x 4in x 4in rubber block with a similar sized steel block stacked on top. (They're jewelry and metal working tools.) Parking those on an edge that I'm not working keeps things in place without having to glue or tack my piece to a larger object and the rubber is pretty good about not damaging things. Quote Share this post Link to post Share on other sites
terrypen Report post Posted January 23, 2015 Thanks, I'll try to give those a shot. Terry Quote Share this post Link to post Share on other sites
Charliewz Report post Posted January 23, 2015 I use the 2lb. mini anvil from Tandy https://www.tandyleatherfactory.com/en-usd/home/department/tools/setters-anvils/3101-00.aspx, just glued a piece of leather on the bottom. And have made bean bag weights using aquarium rock, but the anvil is handiest for me. Charlie Quote Share this post Link to post Share on other sites
Sluggo001 Report post Posted January 23, 2015 I use a leather bag of shot. Quote Share this post Link to post Share on other sites
