Chief31794 Report post Posted March 3, 2015 (edited) The big one is two layers of 7/8 oz Hermann Oak laminated together, the Ruger .44 Mag has a 10-1/2" barrel. I don't think he was wanting it for concealed carry. The two Taurus 9mm are two separate pistols, the one with the wide holster has a laser sight attached below the barrel, other than that they are the same. The star inlay is Sea Snake (dyed blue). Chief Edited March 3, 2015 by Chief31794 Quote Share this post Link to post Share on other sites
Rohn Report post Posted March 3, 2015 I like those holsters Chief. I make quite a few big ones that fit Taurus Raging Bull and will also fit the Ruger Black Hawk. It seems people have a hard time finding holsters to fit these big guns. Real nice work on those. Quote Share this post Link to post Share on other sites
keplerts Report post Posted March 6, 2015 Nice work Chief! Really like the colors you chose. What kind of Taurus is that with the laser? A fellow wants me to make him a holster for his Taurus PT111 G2 Millennium that also has an under the barrel laser site. Would you be interested in sharing your pattern for this? If not thats ok. Anyway, really nice work! Tom Quote Share this post Link to post Share on other sites
Chief31794 Report post Posted March 6, 2015 Nice work Chief! Really like the colors you chose. What kind of Taurus is that with the laser? A fellow wants me to make him a holster for his Taurus PT111 G2 Millennium that also has an under the barrel laser site. Would you be interested in sharing your pattern for this? If not thats ok. Anyway, really nice work! Tom Tom, I don't remember the model, they were 9MM. I wouldn't have a problem sharing the patterns, but I don't keep them, I make a new one for each holster and throw them away when the job ships. Sorry, Chief Quote Share this post Link to post Share on other sites
keplerts Report post Posted March 6, 2015 Thats okay, Chief. The one I need to make is a 9mm as well. I'll just make up a pattern. I was concerned about the laser sight on the pistol. Did your pistol fit loose? Is that why you put on the retention strap? Tom Quote Share this post Link to post Share on other sites
Chief31794 Report post Posted March 7, 2015 Thats okay, Chief. The one I need to make is a 9mm as well. I'll just make up a pattern. I was concerned about the laser sight on the pistol. Did your pistol fit loose? Is that why you put on the retention strap? Tom I've done a few of these with the laser sight and by their design they have to fit a little loose, if not there is a danger of turning the sight on when holstering the weapon and you can sew in under the trigger housing because the area is filled. I always recommend a retention strap regardless, this customer asked for them before I suggested them. Chief Quote Share this post Link to post Share on other sites
